[Pansophy] Fw: traveler list

[Mark Wiseman]

________________________________
From: Mark Wiseman
Sent: Thursday, July 23, 2020 5:59 AM
To: Ed Daly <edaly at jlab.org>
Cc: Katherine Wilson <kwilson at jlab.org>; Kirk Davis <kdavis at jlab.org>
Subject: traveler list

Ed
I have completed the column's on Author, Reviewer 1, Reviewer 2, and Project manager in the attached.   I would suggest having Kirk review the cavity acceptance through cavity string assembly travelers to see if he agrees.   I am not as familiar with that group as I should be some their maybe better persons, or some maybe over committed as well.    You or Katherine should do the same on the rest, though I know that group better.

The list looks mostly appropriate to me.

  1.  There was a MLI installation procedure listed under spaceframe assembly and not a corresponding one in Cold Mass Assembly and Final Assembly.   Maybe this is better handled with a generic installation procedure.  I know the MLI blankets are covered in the Cold Mass Assembly, though not in detail.
  2.  There are a number of Leak Test Procedures.   Again I would think generic procedures might cover this and pressure testing.   Maybe these travelers just reference the generic procedures for the individual components which would be OK as well.
  3.  I did not see one on pressure testing, but this may be covered in the Final Assembly traveler.

Hope this helps.
Mark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200806/55bb5bd7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SNSPPU_MasterTravelerListing_25June2020_MW.xlsm
Type: application/vnd.ms-excel.sheet.macroenabled.12
Size: 76415 bytes
Desc: SNSPPU_MasterTravelerListing_25June2020_MW.xlsm
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200806/55bb5bd7/attachment-0001.bin>