[Pansophy] SNSPPU-INSP-HOBCB Inspection

[E. Anne McEwen]

Hi Gary

I think I figured it out – my mistake – somehow missed printing of the A026. Print in the traveler when I went to see Calvin

Thanks for your help – Anne

From: Gary Cheng <cheng at jlab.org>
Sent: Monday, November 16, 2020 2:23 PM
To: E. Anne McEwen <mcewen at jlab.org>
Cc: Ed Daly <edaly at jlab.org>; SRF Inventory (srfinv at jlab.org) <srfinv at jlab.org>; SRF Pansophy (pansophy at jlab.org) <pansophy at jlab.org>; Katherine Wilson <kwilson at jlab.org>; Naeem Huque <huque at jlab.org>
Subject: Re: SNSPPU-INSP-HOBCB Inspection

Hi Anne,

I had to step away for a while and thanks for Naeem's help!
If something is still unclear about the HOBCB kits, please let me know.

Thanks,
Gary
On 11/16/2020 1:13 PM, Naeem Huque wrote:
[cid:image001.png at 01D6BC27.F424B0C0]

[cid:image002.png at 01D6BC27.F424B0C0]

There are 3 bellows to a kit and the photos seem to match exactly the kit list above (taken from the traveler). Three stickers are for the separate bellows, and one sticker is the kit. I don't understand the issue...

Thanks,
Naeem
________________________________
From: Katherine Wilson <kwilson at jlab.org><mailto:kwilson at jlab.org>
Sent: Monday, November 16, 2020 11:54 AM
To: E. Anne McEwen <mcewen at jlab.org><mailto:mcewen at jlab.org>
Cc: Naeem Huque <huque at jlab.org><mailto:huque at jlab.org>; Gary Cheng <cheng at jlab.org><mailto:cheng at jlab.org>; Ed Daly <edaly at jlab.org><mailto:edaly at jlab.org>; SRF Inventory (srfinv at jlab.org<mailto:srfinv at jlab.org>) <srfinv at jlab.org><mailto:srfinv at jlab.org>; SRF Pansophy (pansophy at jlab.org<mailto:pansophy at jlab.org>) <pansophy at jlab.org><mailto:pansophy at jlab.org>
Subject: Re: SNSPPU-INSP-HOBCB Inspection

A026 is the con bellows.

> On Nov 16, 2020, at 11:42, E. Anne McEwen <mcewen at jlab.org><mailto:mcewen at jlab.org> wrote:
>
> Hello Naeem & Gary
>
> I went up  to inventory again  and had Calvin open one of the boxes - 2 of the bellows had part numbers that match the traveler you speak of (attached)  , however there is a 3rd bellows with Part No  ending A26, that is not in your traveler
>
> So I asked Calvin to put the parts back in the box until it can all be sorted out - there is a lot of other work we need to get done for C75 & P1 before Thanksgiving
>
> FYI-  Where we have the travelers & dwgs   and the part is not too big , I have been bringing down the first article - so that it is available should there be an opportunity  - but this one I don't think is clear yet
>
> Anne
>
>
> -----Original Message-----
> From: copier at jlab.org<mailto:copier at jlab.org> <copier at jlab.org><mailto:copier at jlab.org>
> Sent: Monday, November 16, 2020 11:30 AM
> To: E. Anne McEwen <mcewen at jlab.org><mailto:mcewen at jlab.org>
> Subject: Xerox Scan
>
> Please open the scanned attachment
>
> Number of Images: 5
> Attachment File Type: PDF
>
> Device Name: cs31
> Device Location: 58    Test Lab    2nd Fl Rm 2206
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20201116/22082f39/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 5236 bytes
Desc: image001.png
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20201116/22082f39/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 86396 bytes
Desc: image002.png
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20201116/22082f39/attachment-0003.png>