[Pansophy] SNSPPU vac vessel travelers

[Mike Dickey]

Hi Matt,

In the INSP traveler, I changed the acronym from SFRSN to VVSN.

In the LEAK traveler, the serial number selections needs to be added to step 1.

As for Survey & Alignment, they have performed measurements at Bluecrab, the TL North Receiving area, and in front of the Test Cave.  Pretty much where ever the vacuum vessel is setup.  I would suggest making the work center CMA, and let John Fischer coordinate with S&A to accomplish this task.

Also, the traveler nomenclature needs to be corrected/updated.

Mike Dickey
SRF Inventory Technician
Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755

From: Pansophy <pansophy-bounces at mailman.jlab.org> On Behalf Of Matt Marchlik
Sent: Monday, October 26, 2020 4:11 PM
To: pansophy <pansophy at jlab.org>
Subject: [Pansophy] SNSPPU vac vessel travelers

Hi,

Here are the SNSPPU vacuum vessel travelers. There are two travelers, one inspection Traveler and one Leak Test Traveler. Please confirm that I have everything correct from a formatting scope.

However, the vac vessel is a large item that will need survey and alignment (S&A) to do the dimensional inspection. Does this require a change to the workstation from CMM to another work station or does the CMM station work with S&A to get the inspection done?

Thanks,
Matt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20201027/3751e27b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SNSPPU-CM-INSP-VV.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 209835 bytes
Desc: SNSPPU-CM-INSP-VV.docx
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20201027/3751e27b/attachment-0001.docx>