[Pansophy] PRIMeS notification that item(s) have been received for P.O. 20-M0986

[Naeem Huque]

Hi Mike,

I was referring to the emails that Calvin generally sends with the photos of the parts that have arrived; we reply with the required information after that. We would need to do this for parts coming from the machine shop, as they won't have any PO number. Does the machine shop request number suffice in these cases?

The documentation is attached.

Thanks,
Naeem
________________________________
From: Mike Dickey <mdickey at jlab.org>
Sent: Monday, September 14, 2020 10:09 AM
To: Naeem Huque <huque at jlab.org>; Matt Weaks <weaksmc at jlab.org>
Cc: Calvin Barnes <cbarnes at jlab.org>; pansophy <pansophy at jlab.org>
Subject: RE: PRIMeS notification that item(s) have been received for P.O. 20-M0986


Naeem,



SOTRs will always get an automated email notification from PRIMeS whenever their parts are checked in.  However, as you can see in the original email below, the Status is listed as “NO INSPECTION REQUIRED”, because no information was provided for these parts.  Likewise there is no INV traveler in place, so the automated process of instantiating the INV travelers for these parts did not run and we have nowhere to attach the documentation.



Thanks again,



Megan,



Could you generate an AUP-INV-OCLID?



Thanks,



Mike Dickey

SRF Inventory Technician

Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755



From: Naeem Huque <huque at jlab.org>
Sent: Monday, September 14, 2020 9:52 AM
To: Mike Dickey <mdickey at jlab.org>; Matt Weaks <weaksmc at jlab.org>
Cc: Calvin Barnes <cbarnes at jlab.org>; pansophy <pansophy at jlab.org>
Subject: Re: PRIMeS notification that item(s) have been received for P.O. 20-M0986



Hi Mike,



We normally get an email when parts arrive and Matt replies with the abbrev (please correct me if I'm wrong). This time, we only got the notice that they were entered into the system. They will need an abbrev in order to be attached to the travelers; what's the best way to get that done? They can be removed and resubmitted if required, correct?



Not all the incoming parts are going to have PO numbers attached, but I'll get a list together with future parts



Thanks,

Naeem

________________________________

From: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>
Sent: Monday, September 14, 2020 9:44 AM
To: Matt Weaks <weaksmc at jlab.org<mailto:weaksmc at jlab.org>>; Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>
Cc: Calvin Barnes <cbarnes at jlab.org<mailto:cbarnes at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: PRIMeS notification that item(s) have been received for P.O. 20-M0986



All,



It’s a little late.  All information is processed (submitted to the database) at the time of receipt.



Please send a full list of pending parts for the AUP project.  Please include:



P.O. number

Part/Drawing number

Acronym

Traveler requirements (INV, INSP, CHEM, ASSY, etc.)



Thank you for your cooperation.



Mike Dickey

SRF Inventory Technician

Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755



From: Matt Weaks <weaksmc at jlab.org<mailto:weaksmc at jlab.org>>
Sent: Monday, September 14, 2020 9:26 AM
To: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>; Calvin Barnes <cbarnes at jlab.org<mailto:cbarnes at jlab.org>>
Cc: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>
Subject: RE: PRIMeS notification that item(s) have been received for P.O. 20-M0986



Good morning Mike,



The abbreviation for JL0088271 – Outer Can Lid is OCLID



Let me know if you need any additional information,



Thanks,

-Matt



From: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>
Sent: Monday, September 14, 2020 9:18 AM
To: Calvin Barnes <cbarnes at jlab.org<mailto:cbarnes at jlab.org>>; Matt Weaks <weaksmc at jlab.org<mailto:weaksmc at jlab.org>>
Cc: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>
Subject: Re: PRIMeS notification that item(s) have been received for P.O. 20-M0986



Hi Matt,



Could you please let Mike know the abbrev for this part



Thanks,

Naeem

________________________________

From: cbarnes at jlab.org<mailto:cbarnes at jlab.org> <cbarnes at jlab.org<mailto:cbarnes at jlab.org>>
Sent: Monday, September 14, 2020 8:45 AM
To: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>
Cc: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>; Calvin Barnes <cbarnes at jlab.org<mailto:cbarnes at jlab.org>>
Subject: PRIMeS notification that item(s) have been received for P.O. 20-M0986



This is a PRIMeS notification for your information and/or action:

Following item(s) have been received into inventory for P.O. 20-M0986.

Part Number

Part Rev

Part Name

Serial Number

Quantity

Status

Location

JL0088271

A

HORIZONTAL HOM DAMPER OUTER CAN LID

01

1

NO INSPECTION REQUIRED

1G

JL0088271

A

HORIZONTAL HOM DAMPER OUTER CAN LID

02

1

NO INSPECTION REQUIRED

1G

JL0088271

A

HORIZONTAL HOM DAMPER OUTER CAN LID

03

1

NO INSPECTION REQUIRED

1G


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200914/20a0bfba/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PO 20-M0986 JL0088271 InspRep.pdf
Type: application/pdf
Size: 451461 bytes
Desc: PO 20-M0986 JL0088271 InspRep.pdf
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200914/20a0bfba/attachment-0002.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Signed QCR_34630.pdf
Type: application/pdf
Size: 273191 bytes
Desc: Signed QCR_34630.pdf
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200914/20a0bfba/attachment-0003.pdf>