[Pansophy] FW: New DocuShare document routing task (Step 1 Completion): PLACLN-PR-VSA-CAV-MODE.docx

[Allen Samuels]

Tiffany,

Tom powers has disapproved PLACLN-PR-VSA-CAV-MODE. Please address his requests, and upload the revised version to ready for approvals. I will route it from there and we can move forward.

Thank you for your time,

Allen Samuels

From: DocuShare Workflow <docushare at jlab.org>
Sent: Tuesday, April 27, 2021 3:39 PM
To: Allen Samuels <samuels at jlab.org>
Subject: New DocuShare document routing task (Step 1 Completion): PLACLN-PR-VSA-CAV-MODE.docx

You have a new DocuShare document routing task:

Subject: PLACLN-PR-VSA-CAV-MODE.docx
Date: 04/27/2021 15:38:44

Updated with Tiffany's revisions

Step 1 Completion:

Tiffany Ganey, 04/09/2021 12:25:19 Approved:

Natalie Brock, 04/09/2021 14:32:13 Approved:

Tom Powers, 04/27/2021 15:38:44 Disapproved:

General warnings.  The VTA/VSA is also a radiation area when high power tests are being preformed. In addition to flip signs indicating a change in state, the megenta beacons on each shield lid are an indication that high power operation is enabled.  Individuals who have not approved to be in the VTA/VSA during high power operation as per the RWP are required to leave the area during high power testing.


Step 7.3.  There is a bug in at least one of the NAs.  If all of the selections are blank choose the cal kit 85514A then choose cal kit 85515A.  {I do not know what it works but it does and I reported it to Keysight.}


Step 7.7 if you interrupt the calibration process, restart it or do one of the standards multiple times the percent complete will likely be in error it is better to look for the small check marks above the green open short load boxes.


Will be approved after the above comments are addressed.






Tony Reilly, 04/12/2021 11:35:16 Approved:

To view your pending document routing tasks, click on the link below to login to DocuShare:

https://jlabdoc.jlab.org/docushare/dsweb/routing/routing_email.jsp?url=report_base.jsp&reportType=ForApprovalCompletion&routingSlipRequestID=17432&notifyID=17443&workFlowJobName=17432
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210427/f84dca97/attachment-0001.html>