[Pansophy] FW: P1 Window Traveler ?

[Mike Drury]

There is a file upload block on page 5, step 10.  All of these different 
tests should exist in separate traveler instances.  If a descriptive 
field needs to be added to describe what stage the window is in, we can 
do that.
Mike

On 1/7/2021 11:01 AM, Leonard Page wrote:
> I just showed Scott the issues with the P1 traveler and he agrees many 
> steps were left out like where to input the window test data. Also is 
> there a need to input all the testing done each step of the way ,for 
> instance the off the shelf test of the C100 style windows , the flange 
> attachment  test, the wave guide attachment test and the multiple F100 
> flange attachment testing or just the final acceptance RF test.
> LP
> ------------------------------------------------------------------------
> *From:* Allen Samuels <samuels at jlab.org>
> *Sent:* Thursday, January 7, 2021 10:33 AM
> *To:* E. Anne McEwen <mcewen at jlab.org>
> *Cc:* SRF Pansophy (pansophy at jlab.org) <pansophy at jlab.org>; Valerie 
> Bookwalter <bookwalt at jlab.org>; Scott Williams <scott at jlab.org>; 
> Leonard Page <lpage at jlab.org>; Michael Drury <drury at jlab.org>
> *Subject:* RE: FW: P1 Window Traveler ?
>
> Hi Anne,
>
> If the author says the traveler is ready, then it’s perfectly fine for 
> you to move it in their stead. Please put it and any other travelers 
> that are ready for approval into the ready for approvals folder, and I 
> will route them for approval.
>
> Allen
>
> *From:* E. Anne McEwen <mcewen at jlab.org>
> *Sent:* Thursday, January 7, 2021 10:22 AM
> *To:* Allen Samuels <samuels at jlab.org>
> *Cc:* SRF Pansophy (pansophy at jlab.org) <pansophy at jlab.org>; Valerie 
> Bookwalter <bookwalt at jlab.org>; Scott Williams <scott at jlab.org>; 
> Leonard Page <lpage at jlab.org>; Michael Drury <drury at jlab.org>
> *Subject:* FW: FW: P1 Window Traveler ?
>
> Hi Allen
>
> We found a traveler in drafts where Mike is the author, where he said 
> (see below) that its ready to be sent out for approval
>
> Could you please get this started for the traveler P1-TUNE-WINCR-RFIN 
> (the one attached is what I found in the drafts folder
>
> From Lenard’s email there might be other travelers also for P1, 
> hopefully Scott can help to sort that part out
>
> Sorry I am not following the process – but I am not the author , so 
> did not want to start moving travelers around in Docushare
>
> Thanks Anne  …..
>
> *From:* Mike Drury <drury at jlab.org <mailto:drury at jlab.org>>
> *Sent:* Thursday, January 7, 2021 10:05 AM
> *To:* E. Anne McEwen <mcewen at jlab.org <mailto:mcewen at jlab.org>>
> *Cc:* Scott Williams <scott at jlab.org <mailto:scott at jlab.org>>; Leonard 
> Page <lpage at jlab.org <mailto:lpage at jlab.org>>; Valerie Bookwalter 
> <bookwalt at jlab.org <mailto:bookwalt at jlab.org>>
> *Subject:* Re: FW: P1 Window Traveler ?
>
> Hi Anne,
> This document should be sent around for whatever approvals are necessary.
> Thanks,
> Mike
>
> On 1/7/2021 9:35 AM, E. Anne McEwen wrote:
>
>     Hi Mike
>
>     I notice that you appear to be the author , are you ready to send
>     this Traveler out for approval so it can be made available to
>     Lenard in Pansophy ?
>
>     Please let us know if you need any help
>
>     Thanks Anne
>
>     *From:* E. Anne McEwen
>     *Sent:* Wednesday, January 6, 2021 1:09 PM
>     *To:* Scott Williams <scott at jlab.org> <mailto:scott at jlab.org>;
>     Micheal Drury (drury at jlab.org <mailto:drury at jlab.org>)
>     <drury at jlab.org> <mailto:drury at jlab.org>
>     *Cc:* Leonard Page <lpage at jlab.org> <mailto:lpage at jlab.org>;
>     Valerie Bookwalter <bookwalt at jlab.org> <mailto:bookwalt at jlab.org>
>     *Subject:* RE: P1 Window Traveler ?
>
>     Hi Scott an Mike
>
>     Leonard was asking about the travelers for the P1 window tests  –
>     I found this in drafts folder from Mike – is it  the right one ,
>     and if so is it ready to be sent out for approval ?
>
>     Leonard said he had a lot of data  collected – just needs a
>     traveler to put it into
>
>     Thanks Anne
>
>     *From:* E. Anne McEwen
>     *Sent:* Wednesday, January 6, 2021 12:08 PM
>     *To:* Scott Williams <scott at jlab.org <mailto:scott at jlab.org>>
>     *Cc:* Leonard Page <lpage at jlab.org <mailto:lpage at jlab.org>>;
>     Valerie Bookwalter <bookwalt at jlab.org <mailto:bookwalt at jlab.org>>
>     *Subject:* P1 Window Traveler ?
>
>     Hi Scott
>
>     Could you let me know your plans for the P1 Window Traveler ?
>
>     Leonard called, and has lots of data , but nowhere to put it
>
>     We could clone a c100 Traveler if this is what you would like to do
>
>     Please  let us know how we can help
>
>     Thanks Anne
>
>     *_______________________________________________________________________________*
>
>     *E. Anne McEwen *
>
>     JSA / Jefferson Lab
>
>     SRF Institute
>
>     Newport News, VA 23606
>
>     Office: +1 (757) 269-5539
>
>     Email: mcewen at jlab.org <mailto:mcewen at jlab.org>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210107/914e4ecb/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1-TUNE-WINCR-RFIN.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 208521 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210107/914e4ecb/attachment-0001.docx>