[Pansophy] Fw: Rework Done: NCR:247 on SNSPPU-INSP-TPHTB-R1--2
Naeem Huque
huque at jlab.org
Wed Mar 31 14:30:48 EDT 2021
Hello,
Could you please change the NCR disposition permission on this traveler from Katherine to me
Thanks,
Naeem
________________________________
From: Katherine Wilson <kwilson at jlab.org>
Sent: Wednesday, March 31, 2021 12:29 PM
To: Naeem Huque <huque at jlab.org>
Subject: Fw: Rework Done: NCR:247 on SNSPPU-INSP-TPHTB-R1--2
________________________________
From: JFMOORE at JLAB.ORG <JFMOORE at JLAB.ORG>
Sent: Wednesday, March 31, 2021 11:56 AM
To: Matt Marchlik <marchlik at jlab.org>
Cc: Ed Daly <edaly at jlab.org>; Katherine Wilson <kwilson at jlab.org>; Jerry Moore <jfmoore at jlab.org>
Subject: Rework Done: NCR:247 on SNSPPU-INSP-TPHTB-R1--2
An Staff/Technician has reworked Non-Conformance Report - sequence number 247 for traveler SNSPPU-INSP-TPHTB-R1--2.
REWORK
Rework Staff: JFMOORE
Rework Date: 31-Mar-2021
Rework Comment: Reworked seal surface area by hand, dings are too deep to polish.
Verify Staff: JFMOORE
Verify Date: 31-Mar-2021
Verify Comment: After rework by hand,dings still noticable. See pictures after rework. The rest of the seal surface areas have good finish.
ENGINEER RESPONSE
Response Engr:
Response Date:
Disposition: Hold/Modify
Disposition Comment:
NCR PROBLEM DESCRIPTION
SN: 004
SNtype: TPHTBSN
DRAWING NUM:
PART DESCRIPTION:
TRAV_ID: SNSPPU-INSP-TPHTB
TRAV_REV: R1
TRAV_SEQ_NUM: 2
DESCRIBE STAFF: JFMOORE
DESCRIBE DATE: 2021-03-15 12:00:00.0
DESCRIBE COMMENT: Sealing surface area has light scratches.
NOTIFICATION COMMENT:
The NCR is at the following URL: 247<https://pansophy.jlab.org/pansophy/Travelers/TRAVELER_FORM.cfm?project=SNSPPU&area=SNSPPU&system=INSP&TRAV_ID=SNSPPU-NCR&TRAV_REVISION=R11&page=3&maxpage=4&TRAV_SEQ_NUM=247&travstat=&serialnum=004>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210331/c4ac112f/attachment-0001.html>
More information about the Pansophy
mailing list