[Pansophy] Rework Done: NCR:247 on SNSPPU-INSP-TPHTB-R1--2

[Megan McDonald]

Done

From: Pansophy <pansophy-bounces at mailman.jlab.org> On Behalf Of Naeem Huque
Sent: Wednesday, March 31, 2021 2:31 PM
To: pansophy <pansophy at jlab.org>
Subject: [Pansophy] Fw: Rework Done: NCR:247 on SNSPPU-INSP-TPHTB-R1--2

Hello,

Could you please change the NCR disposition permission on this traveler from Katherine to me

Thanks,
Naeem

________________________________
From: Katherine Wilson <kwilson at jlab.org<mailto:kwilson at jlab.org>>
Sent: Wednesday, March 31, 2021 12:29 PM
To: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>
Subject: Fw: Rework Done: NCR:247 on SNSPPU-INSP-TPHTB-R1--2



________________________________
From: JFMOORE at JLAB.ORG<mailto:JFMOORE at JLAB.ORG> <JFMOORE at JLAB.ORG<mailto:JFMOORE at JLAB.ORG>>
Sent: Wednesday, March 31, 2021 11:56 AM
To: Matt Marchlik <marchlik at jlab.org<mailto:marchlik at jlab.org>>
Cc: Ed Daly <edaly at jlab.org<mailto:edaly at jlab.org>>; Katherine Wilson <kwilson at jlab.org<mailto:kwilson at jlab.org>>; Jerry Moore <jfmoore at jlab.org<mailto:jfmoore at jlab.org>>
Subject: Rework Done: NCR:247 on SNSPPU-INSP-TPHTB-R1--2


An Staff/Technician has reworked Non-Conformance Report - sequence number 247 for traveler SNSPPU-INSP-TPHTB-R1--2.
REWORK
Rework Staff:
JFMOORE



Rework Date:
31-Mar-2021



Rework Comment:
Reworked seal surface area by hand, dings are too deep to polish.



Verify Staff:
JFMOORE



Verify Date:
31-Mar-2021



Verify Comment:
After rework by hand,dings still noticable. See pictures after rework. The rest of the seal surface areas have good finish.




ENGINEER RESPONSE
Response Engr:




Response Date:




Disposition:
Hold/Modify
Disposition Comment:





NCR PROBLEM DESCRIPTION
SN:
004
SNtype:
TPHTBSN
DRAWING NUM:

PART DESCRIPTION:

TRAV_ID:
SNSPPU-INSP-TPHTB
TRAV_REV:
R1
TRAV_SEQ_NUM:
2
DESCRIBE STAFF:
JFMOORE
DESCRIBE DATE:
2021-03-15 12:00:00.0
DESCRIBE COMMENT:
Sealing surface area has light scratches.
NOTIFICATION COMMENT:


The NCR is at the following URL: 247<https://pansophy.jlab.org/pansophy/Travelers/TRAVELER_FORM.cfm?project=SNSPPU&area=SNSPPU&system=INSP&TRAV_ID=SNSPPU-NCR&TRAV_REVISION=R11&page=3&maxpage=4&TRAV_SEQ_NUM=247&travstat=&serialnum=004>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210331/8e30e888/attachment.html>