[Pansophy] FW: PPU-01 Cryomodule Changes SNSPPU-CMA-CMASS-ASSY Serial Number correction

[Megan McDonald]

Part 1 - this pertains to an email that I just saw from 8/11/2021 from Gary that we didn't respond to


From: Pansophy <pansophy-bounces at mailman.jlab.org> On Behalf Of Valerie Bookwalter
Sent: Monday, April 5, 2021 3:33 PM
To: Naeem Huque <huque at jlab.org>
Cc: srfinv at jlab.org; Ed Daly <edaly at jlab.org>; E. Anne McEwen <mcewen at jlab.org>; pansophy <pansophy at jlab.org>; Tony Reilly <areilly at jlab.org>
Subject: Re: [Pansophy] PPU-01 Cryomodule Changes SNSPPU-CMA-CMASS-ASSY Serial Number correction

Naeem,

The CMASSSN is an incorrect serial number as the Cold Mass is Assembled at JLab and not received as a part like in L2PRD.
The traveler SNSPPU-CMA-CMASS-ASSY has been modified to have CMSN which is what is needed to connect the cavity string with the cryomodule for reports/drill-downs.
I hope this does not cause any problems for you.

Thank You.

Valerie Bookwalter
Jefferson Lab, SRF Department
Pansophy Team
1-757-813-6716 (CELL)
1-767-269-5802 (OFFICE - currently working offsite)



From: Pansophy <pansophy-bounces at mailman.jlab.org<mailto:pansophy-bounces at mailman.jlab.org>> On Behalf Of Mike Dickey
Sent: Monday, April 5, 2021 2:32 PM
To: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>
Cc: srfinv at jlab.org<mailto:srfinv at jlab.org>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: Re: [Pansophy] PPU-01 Cryomodule Changes

Hi Naeem,

I thought that once the String came out of the Clean Room, it usually started tracking as the CMSN.  CMASSSN is unique to SNSPPU.

Please check the CM Locations page for accuracy.

Mike Dickey
SRF Inventory Technician
Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755

From: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>
Sent: Monday, April 5, 2021 2:22 PM
To: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>
Cc: srfinv at jlab.org<mailto:srfinv at jlab.org>
Subject: PPU-01 Cryomodule Changes

Hi Mike,

Could you please make the CMASSSN open with CMASS01 for the traveler. Also, PPU-01 should move from the cleanroom to the assembly rail (closest to the cantilever fixture) on the test lab production floor board on Pansophy

Thanks,
Naeem

Naeem Huque
Staff Engineer
Superconducting Radiofrequency (SRF)
Jefferson Lab
12000 Jefferson Ave
Newport News
VA, 23606
Cell: 217-721-5422
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210901/d6bb1dee/attachment-0001.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ATT00001.txt
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210901/d6bb1dee/attachment-0001.txt>