[Pansophy] Please obsolete PPU Traveler SNSPPU-INSP-THRM

[E. Anne McEwen]

Thanks Matt -

then based on your EMAIL we will ask the Pansophy Team to obsolete this traveler SNSPPU-INSP-THRM

Anne

From: Matt Marchlik <marchlik at jlab.org>
Sent: Friday, January 14, 2022 1:39 PM
To: E. Anne McEwen <mcewen at jlab.org>
Cc: John Fischer <fischer at jlab.org>
Subject: Re: Space Frame Inspection & Thermal Shield

Hi Anne,

Ability fabricated the thermal shields and then sent them to Meyer to be added to the Spaceframe Thermal Shield Assembly. Meyer performed the inspection of each thermal shield per our traveler. Therefore, we are not performing an inspection of the thermal shields.

Thanks,
Matt

________________________________
From: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Sent: Friday, January 14, 2022 1:23 PM
To: Matt Marchlik <marchlik at jlab.org<mailto:marchlik at jlab.org>>
Cc: John Fischer <fischer at jlab.org<mailto:fischer at jlab.org>>
Subject: Space Frame Inspection & Thermal Shield


Hi Matt



I noticed just now there is a Thermal Shield Inspection traveler for PPU that has never been used



IN the meantime, Phil & I  just looked at the space frame #2 just delivered, and saw that the thermal shield is already installed on the Space Frame . , which leaves me wondering if the separate traveler for the Thermal Shield Traveler  was meant to be obsoleted  since it appears that the supplier is doing the installation  ?



I have attached a down load of both travelers (Space Frame traveler was filled out for SN 004)



Could you let me know your comments   ?



Thanks Anne



_______________________________________________________________________________

E. Anne McEwen

JSA / Jefferson Lab

SRF Institute

Newport News, VA 23606

Office: +1 (757) 269-5539

Email:   mcewen at jlab.org<mailto:mcewen at jlab.org>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20220114/698b4738/attachment.html>