[Pansophy] Rework Done: NCR:1021 on ER5C-INSP-CAV-R7--221

[Seth Marks]

I just check NCR 1092 and 1090 both NCR's were filled out on November 8th accordingly. NCR 1021 was filled out accordingly on Oct 28th. I'm not following or possibly understanding what this email is in reference to.
V/R
Seth Marks
SRF Cavity and Lapping Tech 1
________________________________
From: Gianluigi Ciovati <gciovati at jlab.org>
Sent: Friday, November 8, 2024 2:16 PM
To: Seth Marks <smarks at jlab.org>; pansophy <pansophy at jlab.org>
Cc: Tony Reilly <areilly at jlab.org>; Danny Forehand <forehand at jlab.org>; George DeKerlegand <georged at jlab.org>; Alex Wildeson <wildeson at jlab.org>
Subject: Re: Rework Done: NCR:1021 on ER5C-INSP-CAV-R7--221

Hi Seth,
after final dispositioning, I've realized that you've updated the re-work steps in the wrong NCR. It was not 1021, the rework steps should have been updated for NCRs 1090 and 1092.

Pansophy, could you please re-open NCR 1021 and cut and past page 3 into page 3 of NCRs 1090 and 1092?

Thanks,
Gigi
________________________________
From: GCIOVATI at JLAB.ORG <GCIOVATI at JLAB.ORG>
Sent: Friday, November 8, 2024 1:27 PM
To: Seth Marks <smarks at jlab.org>
Cc: Tony Reilly <areilly at jlab.org>; Danny Forehand <forehand at jlab.org>; Gianluigi Ciovati <gciovati at jlab.org>; George DeKerlegand <georged at jlab.org>; Seth Marks <smarks at jlab.org>; Alex Wildeson <wildeson at jlab.org>
Subject: Rework Done: NCR:1021 on ER5C-INSP-CAV-R7--221


An Staff/Technician has reworked Non-Conformance Report - sequence number 1021 for traveler ER5C-INSP-CAV-R7--221.

PAGE 3: MODIFICATION/RE-MEASURE
Rework Staff:   SMARKS




Rework Date:    07-Nov-2024




Rework Comment:         Internal portion of HOM beamtube was polished using a dremel tool per Gigi's request.




Verify Staff:   WILDESON




Verify Date:    08-Nov-2024




Verify Comment:         Picture of HOM beamtube after polishing is attached.





ENGINEER RESPONSE
Response Engr:  GCIOVATI




Response Date:  08-Nov-2024




Disposition:
Disposition Comment:    Proceed to electropolishing




PAGE 2: FIRST DISPOSITION
Response Engr:  SMARKS
Response Date:  28-Oct-2024
Disposition:
Disposition Comment:

PAGE 1: INITIATE AND DESCRIBE
SN:     5C75-RI-046
SNtype:         CAVSN
DRAWING NUM:    P110835
PART DESCRIPTION:       C75 CAVITY ASSY
TRAV_ID:        ER5C-INSP-CAV
TRAV_REV:       R7
TRAV_SEQ_NUM:   221
DESCRIBE STAFF:         GEORGED
DESCRIBE DATE:  2024-04-23 09:30:00.0
DESCRIBE COMMENT:       Stains present inside Fpc end group. Please see attached.
NOTIFICATION COMMENT:

The NCR is at the following URL: 1021<https://pansophy.jlab.org/pansophy/Travelers/TRAVELER_FORM.cfm?project=ER5C&area=ER5C&system=NCR&TRAV_ID=ER5C-NCR&TRAV_REVISION=R12&page=3&maxpage=4&TRAV_SEQ_NUM=1021&travstat=&serialnum=5C75-RI-046&SN=5C75-RI-046&SNTYPE=CAVSN>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20241111/6c499378/attachment.html>