[Pansophy] L2HE to L2RB Procedures

[Tony Reilly]

Hi All,

The expectation is the WCDs are in place prior to the work being done.

Thanks,
Tony
________________________________
From: Tony Reilly <areilly at jlab.org>
Sent: Friday, June 6, 2025 12:27 PM
To: Adam Grabowski <adamg at jlab.org>; Allen Samuels <samuels at jlab.org>; Ashley Mitchell <ashleya at jlab.org>; John Fischer <fischer at jlab.org>; Kirk Davis <kdavis at jlab.org>
Cc: pansophy <pansophy at jlab.org>
Subject: Re: L2HE to L2RB Procedures

Hi All,

Any procedure that is referenced by an L2RB Traveler needs to be ported over to L2RB.

Thanks,
Tony
________________________________
From: Adam Grabowski <adamg at jlab.org>
Sent: Friday, June 6, 2025 11:16 AM
To: Allen Samuels <samuels at jlab.org>; Tony Reilly <areilly at jlab.org>; Ashley Mitchell <ashleya at jlab.org>; John Fischer <fischer at jlab.org>
Cc: pansophy <pansophy at jlab.org>
Subject: Re: L2HE to L2RB Procedures

All,

I think most of the L2RB documents should reference L2HE documents. The L2RB documents were not made from scratch, most of them are direct copies and just "rebranded" L2RB. As I understand it, the requirement was to make new travelers and procedures with the new project title, this is being done, I think the references provided a starting point if there are questions in the future about these new travelers and procedures.


Adam Grabowski

SRF Test Engineer, L2HE Project CAM

Jefferson Lab
600 KELVIN DR Suite # 8

Mail Stop 55H
Newport News, VA 23606

O: 757-269-7665

C: 360-320-7003

E: adamg at jlab.org

________________________________
From: Allen Samuels <samuels at jlab.org>
Sent: Thursday, June 5, 2025 1:56 PM
To: Tony Reilly <areilly at jlab.org>; Ashley Mitchell <ashleya at jlab.org>; John Fischer <fischer at jlab.org>
Cc: Adam Grabowski <adamg at jlab.org>; pansophy <pansophy at jlab.org>
Subject: L2HE to L2RB Procedures

Good afternoon, all,

I was working on the L2RB-PR-CMA-WS5-DISA-R1<https://jlabdoc.jlab.org/docushare/dsweb/Get/Document-301140/L2RB-PR-CMA-WS5-DISA.docx> procedure for John when I noticed it was referencing an L2HE procedure. Following the trail, I found that each procedure had another linked L2HE procedure. I was instructed to reach out to you all to ask what to do about them. I took the liberty of converting two of them, which I've attached to this email. The other two I found are L2HE-PR-CMA-FPCW-INSP-R1<https://jlabdoc.jlab.org/docushare/dsweb/Get/Document-244733/L2HE-PR-CMA-FPCW-INSP-R1.pdf> and LCLSII-HE Fundamental Power Coupler ESD<https://jlabdoc.jlab.org/docushare/dsweb/Get/Document-242797/LCLSII-HE-1.2-ES-0059.pdf>. What are your thoughts on this? Should they be ported over to L2RB, or should some alternative solution be implemented?

Allen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20250606/bf3fd3fb/attachment-0001.htm>