[PRad] HyCal work

[Eugene Pasyuk]

Ok. Send us a note when it is OFF. 

-Eugene 

> From: "Chao Peng" <pengc2010 at gmail.com>
> To: "Eugene Pasyuk" <pasyuk at jlab.org>
> Cc: "prad" <prad at jlab.org>, "Steve Christo" <christo at jlab.org>, "Bob Miller"
> <rmiller at jlab.org>
> Sent: Thursday, April 28, 2016 5:55:21 PM
> Subject: Re: [PRad] HyCal work

> Hi Eugene,
> I am taking some data right now, and I will turn the HV off tonight.

> Best Regards,
> Chao

> On Thu, Apr 28, 2016 at 2:17 PM, Eugene Pasyuk < pasyuk at jlab.org > wrote:

>> Tomorrow HyCal should be down and we can start working on it. The first thing to
>> do would be to open beam holes upstream and downstream and install Tedlar tube
>> through the HyCal.

>> If anyone is taking data with HyCal today make sure to finish it and turn all HV
>> off before tomorrow morning. The chiller also should be turned off.

>> -Eugene

>> _______________________________________________
>> PRad mailing list
>> PRad at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/prad

> --
> Chao Peng
> Department of Physics
> BOX 90305
> Duke University
> Durham, NC 27708
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/prad/attachments/20160428/30751e1c/attachment.html>