[PRad] HyCal work

[Chao Peng]

Hi Eugene,

All power supplies are turned off.
It is safe to access HyCal.

Best,
Chao

On Thu, Apr 28, 2016 at 6:03 PM, Eugene Pasyuk <pasyuk at jlab.org> wrote:

> Ok. Send us a note when it is OFF.
>
> -Eugene
>
> ------------------------------
>
> *From: *"Chao Peng" <pengc2010 at gmail.com>
> *To: *"Eugene Pasyuk" <pasyuk at jlab.org>
> *Cc: *"prad" <prad at jlab.org>, "Steve Christo" <christo at jlab.org>, "Bob
> Miller" <rmiller at jlab.org>
> *Sent: *Thursday, April 28, 2016 5:55:21 PM
> *Subject: *Re: [PRad] HyCal work
>
> Hi Eugene,
> I am taking some data right now, and I will turn the HV off tonight.
>
> Best Regards,
> Chao
>
> On Thu, Apr 28, 2016 at 2:17 PM, Eugene Pasyuk <pasyuk at jlab.org> wrote:
>
>> Tomorrow HyCal should be down and we can start working on it. The first
>> thing to do would be to open beam holes upstream and downstream and install
>> Tedlar tube through the HyCal.
>>
>> If anyone is taking data with HyCal today make sure to finish it and turn
>> all HV off before tomorrow morning. The chiller also should be turned off.
>>
>> -Eugene
>>
>> _______________________________________________
>> PRad mailing list
>> PRad at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/prad
>>
>>
>
>
> --
> Chao Peng
> Department of Physics
> BOX 90305
> Duke University
> Durham, NC 27708
>
>


-- 
Chao Peng
Department of Physics
BOX 90305
Duke University
Durham, NC 27708
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/prad/attachments/20160428/1c2fdb56/attachment-0001.html>