[PRad] [New Logentry] Follow-up Re: TI Updates

[Serguei Boiarinov]

Dear all,
some time Saturday after 4pm rols/ directory was disrupted. I restored it after midnight,
but rol2.so file in pgem and fastbus crates could be compromise during that time period,
especially if coda was restarted from scratch during that time. Please make sure data
you are taking are fine.
Sergey

----- Original Message -----
From: "Serguei Boiarinov" <boiarino at jlab.org>
To: "Chao Peng" <pengc2010 at gmail.com>
Cc: "Stepan Stepanyan" <stepanya at jlab.org>, "Dipangkar Dutta" <ddutta07 at gmail.com>, "cpeng" <cpeng at jlab.org>, prad at jlab.org, "Serguei Boiarinov" <boiarino at jlab.org>
Sent: Saturday, June 11, 2016 3:13:54 PM
Subject: Re: [PRad] [New Logentry] Follow-up Re: TI Updates

It looks like all files in /data/totape directory are old,
not sure why they were not moved to silo. But all new (today)
files seems moved to SILO successfully. Please keep moving
data from /data/prad to /data/totape as soon as possible,
it will give more time to cronjob to move them to SILO.

----- Original Message -----
From: "Chao Peng" <pengc2010 at gmail.com>
To: "Stepan Stepanyan" <stepanya at jlab.org>
Cc: "Dipangkar Dutta" <ddutta07 at gmail.com>, "cpeng" <cpeng at jlab.org>, "Serguei Boiarinov" <boiarino at jlab.org>, prad at jlab.org
Sent: Saturday, June 11, 2016 12:56:55 PM
Subject: Re: [PRad] [New Logentry] Follow-up Re: TI Updates

Yes, Actually the 900s have already been saved on silo.
I will double-check this and remove the redundant copy on daq machine.

Best,
Chao

On Sat, Jun 11, 2016 at 11:01 AM, Stepan JLAB <stepanya at jlab.org> wrote:

> I hope we are saving them on tape-silo.
>
> Stepan
>
> Sent from my iPhone
>
> On Jun 11, 2016, at 10:41 AM, Dipangkar Dutta <ddutta07 at gmail.com> wrote:
>
> Hi Chao and Serguei,
> I have started scp-ing the data from the clondaq6 to clondaq5.
> Currently all the runs with ru-number in the 900s is being copied.
> Once they are done you can remove them from clondaq6.
>
> Cheers
> Dipangkar
>
>
> On Sat, Jun 11, 2016 at 9:22 AM, Serguei Boiarinov <boiarino at jlab.org>
> wrote:
>
>> Hi Chao,
>> disk space available on clondaq6:/data seems decreasing. If at some point
>> you do not have
>> enough space there, you can manually (scp) copy data to
>> clondaq5:/data/prad/, it has about 10T
>> available space, use it as reserve.
>> Sergey
>>
>> ----- Original Message -----
>> From: "cpeng" <cpeng at jlab.org>
>> To: prad at jlab.org, "Serguei Boiarinov" <boiarino at jlab.org>, "J. William
>> Gu" <jgu at jlab.org>, "Bryan Moffit" <moffit at jlab.org>
>> Sent: Friday, June 10, 2016 9:05:01 PM
>> Subject: [New Logentry] Follow-up Re: TI Updates
>>
>> Logentry Text:
>> --
>> We experienced some issue with the new TI firmware, it occasionally stops
>> responding to the input triggers, and the block buffer register shows
>> 0x40000008.
>> Bryan helped downgrade the TI firmware, and we used the temporary
>> work-around to solve the live time issue. (disable Fastbus front panel busy
>> input and put a safe value, 28.8 us, for trigger hold off).
>>
>> ---
>>
>> This is a plain text email for clients that cannot display HTML.  The
>> full logentry can be found online at
>> https://logbooks.jlab.org/entry/3409461
>> _______________________________________________
>> PRad mailing list
>> PRad at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/prad
>>
>
> _______________________________________________
> PRad mailing list
> PRad at jlab.org
> https://mailman.jlab.org/mailman/listinfo/prad
>
>
> _______________________________________________
> PRad mailing list
> PRad at jlab.org
> https://mailman.jlab.org/mailman/listinfo/prad
>
>


-- 
Chao Peng
Department of Physics
BOX 90305
Duke University
Durham, NC 27708