[PRad] [New Logentry] Follow-up Re: TI Updates

[gasparan at jlab.org]

  Chao, please pay maximum attention to this subject. It is possible
 that we may face a problem.

 Thanks,
 Ashot


> Just a reminder that move-to-silo process will be stopped tomorrow
> morning. I'd strongly advise to keep
> coping data to /data/totape directory as soon as possible, at least every
> hour, during following 22 hours,
> so disk will be 'almost' empty by tomorrow morning.
>
> ----- Original Message -----
> From: "Serguei Boiarinov" <boiarino at jlab.org>
> To: "Chao Peng" <pengc2010 at gmail.com>
> Cc: "Stepan Stepanyan" <stepanya at jlab.org>, "Dipangkar Dutta"
> <ddutta07 at gmail.com>, "cpeng" <cpeng at jlab.org>, prad at jlab.org, "Serguei
> Boiarinov" <boiarino at jlab.org>
> Sent: Friday, June 17, 2016 11:56:32 AM
> Subject: Re: [PRad] [New Logentry] Follow-up Re: TI Updates
>
> Guys, do not forget to move data to the tape every time you have a chance,
> weekend is coming and half of /data space on clondaq6 is used.
>
> ----- Original Message -----
> From: "Chao Peng" <pengc2010 at gmail.com>
> To: "Stepan Stepanyan" <stepanya at jlab.org>
> Cc: "Dipangkar Dutta" <ddutta07 at gmail.com>, "cpeng" <cpeng at jlab.org>,
> "Serguei Boiarinov" <boiarino at jlab.org>, prad at jlab.org
> Sent: Saturday, June 11, 2016 12:56:55 PM
> Subject: Re: [PRad] [New Logentry] Follow-up Re: TI Updates
>
> Yes, Actually the 900s have already been saved on silo.
> I will double-check this and remove the redundant copy on daq machine.
>
> Best,
> Chao
>
> On Sat, Jun 11, 2016 at 11:01 AM, Stepan JLAB <stepanya at jlab.org> wrote:
>
>> I hope we are saving them on tape-silo.
>>
>> Stepan
>>
>> Sent from my iPhone
>>
>> On Jun 11, 2016, at 10:41 AM, Dipangkar Dutta <ddutta07 at gmail.com>
>> wrote:
>>
>> Hi Chao and Serguei,
>> I have started scp-ing the data from the clondaq6 to clondaq5.
>> Currently all the runs with ru-number in the 900s is being copied.
>> Once they are done you can remove them from clondaq6.
>>
>> Cheers
>> Dipangkar
>>
>>
>> On Sat, Jun 11, 2016 at 9:22 AM, Serguei Boiarinov <boiarino at jlab.org>
>> wrote:
>>
>>> Hi Chao,
>>> disk space available on clondaq6:/data seems decreasing. If at some
>>> point
>>> you do not have
>>> enough space there, you can manually (scp) copy data to
>>> clondaq5:/data/prad/, it has about 10T
>>> available space, use it as reserve.
>>> Sergey
>>>
>>> ----- Original Message -----
>>> From: "cpeng" <cpeng at jlab.org>
>>> To: prad at jlab.org, "Serguei Boiarinov" <boiarino at jlab.org>, "J. William
>>> Gu" <jgu at jlab.org>, "Bryan Moffit" <moffit at jlab.org>
>>> Sent: Friday, June 10, 2016 9:05:01 PM
>>> Subject: [New Logentry] Follow-up Re: TI Updates
>>>
>>> Logentry Text:
>>> --
>>> We experienced some issue with the new TI firmware, it occasionally
>>> stops
>>> responding to the input triggers, and the block buffer register shows
>>> 0x40000008.
>>> Bryan helped downgrade the TI firmware, and we used the temporary
>>> work-around to solve the live time issue. (disable Fastbus front panel
>>> busy
>>> input and put a safe value, 28.8 us, for trigger hold off).
>>>
>>> ---
>>>
>>> This is a plain text email for clients that cannot display HTML.  The
>>> full logentry can be found online at
>>> https://logbooks.jlab.org/entry/3409461
>>> _______________________________________________
>>> PRad mailing list
>>> PRad at jlab.org
>>> https://mailman.jlab.org/mailman/listinfo/prad
>>>
>>
>> _______________________________________________
>> PRad mailing list
>> PRad at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/prad
>>
>>
>> _______________________________________________
>> PRad mailing list
>> PRad at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/prad
>>
>>
>
>
> --
> Chao Peng
> Department of Physics
> BOX 90305
> Duke University
> Durham, NC 27708
> _______________________________________________
> PRad mailing list
> PRad at jlab.org
> https://mailman.jlab.org/mailman/listinfo/prad
>