[PRad] [New Logentry] Follow-up Re: TI Updates

[Serguei Boiarinov]

As a backup we can use 14T /data/prad partition on clondaq5. Please clean it before end of day today.

----- Original Message -----
From: "Serguei Boiarinov" <boiarino at jlab.org>
To: "Chao Peng" <pengc2010 at gmail.com>
Cc: "Stepan Stepanyan" <stepanya at jlab.org>, "Dipangkar Dutta" <ddutta07 at gmail.com>, "cpeng" <cpeng at jlab.org>, prad at jlab.org, "David Rackley" <rackley at jlab.org>, "Sandy Philpott" <philpott at jlab.org>, "Serguei Boiarinov" <boiarino at jlab.org>
Sent: Monday, June 20, 2016 10:15:55 AM
Subject: Re: [PRad] [New Logentry] Follow-up Re: TI Updates

Just a reminder that move-to-silo process will be stopped tomorrow morning. I'd strongly advise to keep
coping data to /data/totape directory as soon as possible, at least every hour, during following 22 hours,
so disk will be 'almost' empty by tomorrow morning.

----- Original Message -----
From: "Serguei Boiarinov" <boiarino at jlab.org>
To: "Chao Peng" <pengc2010 at gmail.com>
Cc: "Stepan Stepanyan" <stepanya at jlab.org>, "Dipangkar Dutta" <ddutta07 at gmail.com>, "cpeng" <cpeng at jlab.org>, prad at jlab.org, "Serguei Boiarinov" <boiarino at jlab.org>
Sent: Friday, June 17, 2016 11:56:32 AM
Subject: Re: [PRad] [New Logentry] Follow-up Re: TI Updates

Guys, do not forget to move data to the tape every time you have a chance,
weekend is coming and half of /data space on clondaq6 is used.

----- Original Message -----
From: "Chao Peng" <pengc2010 at gmail.com>
To: "Stepan Stepanyan" <stepanya at jlab.org>
Cc: "Dipangkar Dutta" <ddutta07 at gmail.com>, "cpeng" <cpeng at jlab.org>, "Serguei Boiarinov" <boiarino at jlab.org>, prad at jlab.org
Sent: Saturday, June 11, 2016 12:56:55 PM
Subject: Re: [PRad] [New Logentry] Follow-up Re: TI Updates

Yes, Actually the 900s have already been saved on silo.
I will double-check this and remove the redundant copy on daq machine.

Best,
Chao

On Sat, Jun 11, 2016 at 11:01 AM, Stepan JLAB <stepanya at jlab.org> wrote:

> I hope we are saving them on tape-silo.
>
> Stepan
>
> Sent from my iPhone
>
> On Jun 11, 2016, at 10:41 AM, Dipangkar Dutta <ddutta07 at gmail.com> wrote:
>
> Hi Chao and Serguei,
> I have started scp-ing the data from the clondaq6 to clondaq5.
> Currently all the runs with ru-number in the 900s is being copied.
> Once they are done you can remove them from clondaq6.
>
> Cheers
> Dipangkar
>
>
> On Sat, Jun 11, 2016 at 9:22 AM, Serguei Boiarinov <boiarino at jlab.org>
> wrote:
>
>> Hi Chao,
>> disk space available on clondaq6:/data seems decreasing. If at some point
>> you do not have
>> enough space there, you can manually (scp) copy data to
>> clondaq5:/data/prad/, it has about 10T
>> available space, use it as reserve.
>> Sergey
>>
>> ----- Original Message -----
>> From: "cpeng" <cpeng at jlab.org>
>> To: prad at jlab.org, "Serguei Boiarinov" <boiarino at jlab.org>, "J. William
>> Gu" <jgu at jlab.org>, "Bryan Moffit" <moffit at jlab.org>
>> Sent: Friday, June 10, 2016 9:05:01 PM
>> Subject: [New Logentry] Follow-up Re: TI Updates
>>
>> Logentry Text:
>> --
>> We experienced some issue with the new TI firmware, it occasionally stops
>> responding to the input triggers, and the block buffer register shows
>> 0x40000008.
>> Bryan helped downgrade the TI firmware, and we used the temporary
>> work-around to solve the live time issue. (disable Fastbus front panel busy
>> input and put a safe value, 28.8 us, for trigger hold off).
>>
>> ---
>>
>> This is a plain text email for clients that cannot display HTML.  The
>> full logentry can be found online at
>> https://logbooks.jlab.org/entry/3409461
>> _______________________________________________
>> PRad mailing list
>> PRad at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/prad
>>
>
> _______________________________________________
> PRad mailing list
> PRad at jlab.org
> https://mailman.jlab.org/mailman/listinfo/prad
>
>
> _______________________________________________
> PRad mailing list
> PRad at jlab.org
> https://mailman.jlab.org/mailman/listinfo/prad
>
>


-- 
Chao Peng
Department of Physics
BOX 90305
Duke University
Durham, NC 27708