[PRad] [EXTERNAL] PRad-II C1 Review Agenda

[gasparan at jlab.org]

  That is fine, we will come to that later.
 Ashot


> There is not enough room to put all VXS crates in the old location. We
> will have readout crates in more than one location and we would need to
> reroute some of the existing cables to different location.  I am just
> thinking what could be potentially reused.
>
> -Eugene
>
>> -----Original Message-----
>> From: gasparan at jlab.org <gasparan at jlab.org>
>> Sent: Wednesday, March 10, 2021 13:07
>> To: Eugene Pasyuk <pasyuk at jlab.org>
>> Cc: Dipangkar Dutta <ddutta07 at gmail.com>; Tyler Hague
>> <tjhague at gmail.com>; prad <prad at jlab.org>
>> Subject: Re: [PRad] [EXTERNAL] PRad-II C1 Review Agenda
>>
>>
>>   That assumes locating new crates with electronics next to HyCal.
>>  Ashot
>>
>>
>>
>> > By the way if we eliminate analog sum and upgrade HyCal, then instead
>> > of adding new cables we can reuse the dynode cables for new modules.
>> >
>> > -Eugene
>> >
>> > From: PRad <prad-bounces at jlab.org> On Behalf Of Eugene Pasyuk
>> > Sent: Wednesday, March 10, 2021 12:50
>> > To: Dipangkar Dutta <ddutta07 at gmail.com>
>> > Cc: Tyler Hague <tjhague at gmail.com>; prad <prad at jlab.org>
>> > Subject: Re: [PRad] [EXTERNAL] PRad-II C1 Review Agenda
>> >
>> > Dipangkar,
>> >
>> > You may also add to your presentation that we will use
>> “random”
>> > trigger to measure and monitor trigger efficiency.
>> >
>> > -Eugene
>> >
>> > From: Dipangkar Dutta
>> <ddutta07 at gmail.com<mailto:ddutta07 at gmail.com>>
>> > Sent: Tuesday, March 09, 2021 10:37
>> > To: Eugene Pasyuk <pasyuk at jlab.org<mailto:pasyuk at jlab.org>>
>> > Cc: Tyler Hague <tjhague at gmail.com<mailto:tjhague at gmail.com>>; prad
>> > <prad at jlab.org<mailto:prad at jlab.org>>
>> > Subject: Re: [PRad] [EXTERNAL] PRad-II C1 Review Agenda
>> >
>> > Hi Eugene,
>> > We had quick discussion about this and thought that it might be good
>> > to have a separate analog sum trigger for cross check and monitoring.
>> > It is written as such on the slide, but I will mention it during the
>> > presentation that the analog sum is just for monitoring purposes.
>> >
>> > But, we should further discuss if we need to have this.
>> > Cheers
>> > Dipangkar
>> >
>> >
>> > On Tue, Mar 9, 2021 at 9:20 AM Eugene Pasyuk
>> > <pasyuk at jlab.org<mailto:pasyuk at jlab.org>> wrote:
>> > Hi Dipangkar,
>> >
>> > On slide 4 you show “new” DAQ but you still have NIM based
>> analog
>> sum.
>> > With FADC we don’t need this. This all will be done by
>> VTP’s using
>> > FADC information. We would not need dynode signals any more.
>> >
>> > -Eugene
>> >
>> > From: PRad <prad-bounces at jlab.org<mailto:prad-bounces at jlab.org>> On
>> > Behalf Of Dipangkar Dutta
>> > Sent: Tuesday, March 09, 2021 10:02
>> > To: Tyler Hague <tjhague at gmail.com<mailto:tjhague at gmail.com>>
>> > Cc: prad <prad at jlab.org<mailto:prad at jlab.org>>
>> > Subject: Re: [PRad] [EXTERNAL] PRad-II C1 Review Agenda
>> >
>> > Hi All,
>> > I have uploaded the DAQ upgrade slides to the review site that Tyler
>> > sent out yesterday.
>> > Please take a look and send me your comments.
>> > Cheers
>> > Dipangkar
>> >
>> >
>> > On Mon, Mar 8, 2021 at 4:01 PM Tyler Hague
>> > <tjhague at gmail.com<mailto:tjhague at gmail.com>> wrote:
>> > Hello everyone,
>> >
>> > The agenda for the PRad-II C1 Review has been posted/updated on
>> > https://secure-
>> web.cisco.com/1qucvY66QsLZ5R6R1oZa1Dyed1x6s20RDId7aFV-U
>> >
>> G7Ns0Lm3V2Yixxl4CXm1kv6_y7LQTskDnUcbH9EHY6uKtG0y5Yj1ejzHaV28rsd9
>> _deLj4
>> >
>> FuMQTAWx_eZJLRNG_ZPerQLjWWkdaFielhdSyn3Vs4k5JAdzwt37enet9X2B4
>> kOjVMFGJ5
>> > 0kf4ajqFkxZohfn3kxjlyRC8fMVLj98qjeHyqRGKr5p-
>> HHGVaSsu4SMtMqw0GfbmjyWpK-
>> > -
>> BMMKBo55kYcbcWDKCULictMriukf_NEzp7kyO3rZQuBNlvrBwo0pJb7xYNAo7I
>> rvIZJ_H
>> > /https%3A%2F%2Fwiki.jlab.org%2Fpcrewiki%2Findex.php%2FPRad-
>> II_C1_Revie
>> > w<https://urldefense.proofpoint.com/v2/url?u=https-3A__secure-
>> 2Dweb.ci
>> > sco.com_1qucvY66QsLZ5R6R1oZa1Dyed1x6s20RDId7aFV-
>> 2DUG7Ns0Lm3V2Yixxl4CXm
>> > 1kv6-5Fy7LQTskDnUcbH9EHY6uKtG0y5Yj1ejzHaV28rsd9-
>> 5FdeLj4FuMQTAWx-5FeZJL
>> > RNG-
>> 5FZPerQLjWWkdaFielhdSyn3Vs4k5JAdzwt37enet9X2B4kOjVMFGJ50kf4ajqFk
>> xZ
>> > ohfn3kxjlyRC8fMVLj98qjeHyqRGKr5p-
>> 2DHHGVaSsu4SMtMqw0GfbmjyWpK-2D-2DBMMK
>> > Bo55kYcbcWDKCULictMriukf-
>> 5FNEzp7kyO3rZQuBNlvrBwo0pJb7xYNAo7IrvIZJ-5FH_
>> > https-253A-252F-252Fwiki.jlab.org-252Fpcrewiki-252Findex.php-252FPRad-
>> > 2DII-5FC1-5FReview&d=DwMFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=V3XNY-
>> MaMKN2LuA
>> > aTdObrA&m=4lLRlb
>>
>> RDYYzWDkBZc82gV3EzfPRKecD4lj_ivk8XL1k&s=kNm18QEOlp9tnl1CVMD3rscR
>> kHc-L0ycmcsXuGXQsaI&e=>
>> >
>> > The BlueJeans link for the open session is immediately below the
>> agenda.
>> >
>> > Thanks,
>> > Tyler
>> > _______________________________________________
>> > PRad mailing list
>> > PRad at jlab.org<mailto:PRad at jlab.org>
>> > https://secure-
>> web.cisco.com/1xDDBflrmuLfJUftoibeoMc5Rrl0MSf7rOLxzWK-s
>> >
>> Tj4pIwMz4HoBf6Er7hwJqdQZ55aRHe5HNchLcXLmcutmdk4SqQxIhi7RpBGmw
>> x4MwEm4jS
>> >
>> RIWfJRtw84ZBpPztkONTxug0ifo4VHrs9TGrI8V0JrBSiQ8wMWAewSqbDqveRc
>> 58nzhW_T
>> >
>> o64bqmGAzoVcoDPXaGE938uz67oGBJtvItoXPSU1L6cfHL50OWda4CwC1cm4d
>> 1EjwSx_Gu
>> >
>> UOljM2tTBFCJmHDDlR_T9zLjUMnvM9fSqCDZnqgew0CGDgm5RRYVeArVB8U
>> 1wuZgkIoAnn
>> >
>> /https%3A%2F%2Fmailman.jlab.org%2Fmailman%2Flistinfo%2Fprad<https://
>> ur
>> > ldefense.proofpoint.com/v2/url?u=https-3A__secure-
>> 2Dweb.cisco.com_1xDD
>> > BflrmuLfJUftoibeoMc5Rrl0MSf7rOLxzWK-
>> 2DsTj4pIwMz4HoBf6Er7hwJqdQZ55aRHe5
>> >
>> HNchLcXLmcutmdk4SqQxIhi7RpBGmwx4MwEm4jSRIWfJRtw84ZBpPztkONTx
>> ug0ifo4VHr
>> > s9TGrI8V0JrBSiQ8wMWAewSqbDqveRc58nzhW-
>> 5FTo64bqmGAzoVcoDPXaGE938uz67oGB
>> > JtvItoXPSU1L6cfHL50OWda4CwC1cm4d1EjwSx-
>> 5FGuUOljM2tTBFCJmHDDlR-5FT9zLjU
>> > MnvM9fSqCDZnqgew0CGDgm5RRYVeArVB8U1wuZgkIoAnn_https-253A-
>> 252F-252Fmail
>> > man.jlab.org-252Fmailman-252Flistinfo-
>> 252Fprad&d=DwMFaQ&c=CJqEzB1piLOy
>> > yvZjb8YUQw&r=V3XNY-
>> MaMKN2LuAaTdObrA&m=4lLRlbRDYYzWDkBZc82gV3EzfPRKecD4
>> > lj_ivk8XL1k&s=rS
>>  xmB6-iK_DDxwJBJKzc5u6lJH86tUNqceqX6Vm-HAg&e=>
>> > _______________________________________________
>> > PRad mailing list
>> > PRad at jlab.org
>> > https://mailman.jlab.org/mailman/listinfo/prad
>> >
>>
>
>