[Primexd] [New Logentry] CCAL moved to beam

[somov at jlab.org]

Logentry Text:
--
We moved the CCAL to the beam.

Run condition:
V-wire, 15 nA, 2x10^-5 radiator,5 mm collimator

The beam flux has been checked using TAC. The TAC rate was below 100 nA.
Voltages of all CCAL channels were set to 750 V. CCAL has not yet been calibrated.

The beam disappeared after Fig. 2





---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3633247
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/primexd/attachments/20181129/6750f098/attachment.html>