[Sbs] cables required

[Donald Jones]

Hi Folks,
We have recently made the decision to transition from using the old FASTBUS ADCs for GEp to the new FADC-based DAQ setup. This required some rethinking of the cables required since the FADCs use LEMO inputs. Our long cables that connect the front end to the DAQ are BNC-BNC so we need to convert these to LEMO. This can be done by either BNC to LEMO patch panels or BNC to LEMO cables.  In all I need about 700 channels more which can be filled by either of the above solutions. If any of you have a few hundred or a few dozen BNC to LEMO connectors or cables (preferably in the 2-5 meter range) that I could borrow, please let me know. The budget is tight and ordering these cables would cost north of $25k. They could be returned to you after GEp completes in 2024.
-Don


Donald Jones
Hall A/C Staff Scientist
Jefferson Lab
Newport News, VA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/sbs/attachments/20230331/619df5c3/attachment.html>