[Solid_ec] HV price

[Xiaochao Zheng]

Hi Alexandre:

Please see these files for updated quotes. 1mA and 3mA are the same price. These are double-width SHV connectors.

 http://hallaweb.jlab.org/experiment/PVDIS/SoLID/EC/meetings/quotes/4055R1%20JLAB%20Zheng.pdf
 http://hallaweb.jlab.org/experiment/PVDIS/SoLID/EC/meetings/quotes/4056R1%20JLAB%20Zheng.pdf

Can you tell me how long the cables should be?  Also which website did you look up on the price for cables and connectors (and model# for both SHV and BNC cable/connectors)? This way I can sum up the cost of all parts and assume JLab can do all cables in house.

Thanks,

Xiaochao



----- Original Message -----
From: "Alexandre Camsonne" <camsonne at jlab.org>
To: "solid daq" <solid_daq at jlab.org>, "solid ec" <solid_ec at jlab.org>
Sent: Friday, March 7, 2014 2:28:33 PM
Subject: [Solid_ec] HV price










I looked up prices a bit : 
a spool of RG59U is about 540 $ for 500 feet 

SHV cables are expensive around 20 $ in large quantities 

so just one cable of 100 ft with 2 SHV connectors one is about 150 $ 

I guess we can set up HV crates in both HRS to make cable not to long it seems it is more expensive than signal cables. 


I guess you might want to make SHV patch pannels for your detectors so it is easy to cable/uncable the detectors. 


>From Xiaochao quotes : 
Mainframes are around 11.5 K$ with up to 16 boards ( less than 600 W ) and board with 24 channels 6.6 K$, so about 350 $ per channel. 


If you could make sure you include HV cables and connectors and a patch pannel if needed in your budget estimate. 


I budgeted the signal cables but you should foresee the cost of any patch panels. 

I assumed signal were going out on BNC. 




Alexandre 








_______________________________________________
Solid_ec mailing list
Solid_ec at jlab.org
https://mailman.jlab.org/mailman/listinfo/solid_ec