[Solid_ec] HV price

[Alexandre Camsonne]

I think we will assume 100 feet cables we can put the crates in HRS.
On Mar 7, 2014 2:35 PM, "Xiaochao Zheng" <xiaochao at jlab.org> wrote:

> Hi Alexandre:
>
> Please see these files for updated quotes. 1mA and 3mA are the same price.
> These are double-width SHV connectors.
>
>
> http://hallaweb.jlab.org/experiment/PVDIS/SoLID/EC/meetings/quotes/4055R1%20JLAB%20Zheng.pdf
>
> http://hallaweb.jlab.org/experiment/PVDIS/SoLID/EC/meetings/quotes/4056R1%20JLAB%20Zheng.pdf
>
> Can you tell me how long the cables should be?  Also which website did you
> look up on the price for cables and connectors (and model# for both SHV and
> BNC cable/connectors)? This way I can sum up the cost of all parts and
> assume JLab can do all cables in house.
>
> Thanks,
>
> Xiaochao
>
>
>
> ----- Original Message -----
> From: "Alexandre Camsonne" <camsonne at jlab.org>
> To: "solid daq" <solid_daq at jlab.org>, "solid ec" <solid_ec at jlab.org>
> Sent: Friday, March 7, 2014 2:28:33 PM
> Subject: [Solid_ec] HV price
>
>
>
>
>
>
>
>
>
>
> I looked up prices a bit :
> a spool of RG59U is about 540 $ for 500 feet
>
> SHV cables are expensive around 20 $ in large quantities
>
> so just one cable of 100 ft with 2 SHV connectors one is about 150 $
>
> I guess we can set up HV crates in both HRS to make cable not to long it
> seems it is more expensive than signal cables.
>
>
> I guess you might want to make SHV patch pannels for your detectors so it
> is easy to cable/uncable the detectors.
>
>
> From Xiaochao quotes :
> Mainframes are around 11.5 K$ with up to 16 boards ( less than 600 W ) and
> board with 24 channels 6.6 K$, so about 350 $ per channel.
>
>
> If you could make sure you include HV cables and connectors and a patch
> pannel if needed in your budget estimate.
>
>
> I budgeted the signal cables but you should foresee the cost of any patch
> panels.
>
> I assumed signal were going out on BNC.
>
>
>
>
> Alexandre
>
>
>
>
>
>
>
>
> _______________________________________________
> Solid_ec mailing list
> Solid_ec at jlab.org
> https://mailman.jlab.org/mailman/listinfo/solid_ec
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/solid_ec/attachments/20140307/f2010d0a/attachment.html