[Bteam] Beam Studies

[Arne Freyberger]

The proposed beam studies plan for Wednesday Feb 8th is below.   Note 
that at Step 5  in the M56 test the beam will be contained in the 
injector for about 2hours.  At this point Drury and C100 team can 
perform their tests on the C100 (rad monitoring without beam).

At the end of the M56 test, the PEPPo magnet test will take place.   
This is a quick test to see if the PEPPo magnets have enough fringe 
field to move the injector beam.

There is also an unlisted  item of changing the RF configuration during 
restoration.  The change will consist turning both C100 modules on at 
some yet to be specified gradient.

Arne


    2 This Week \\ 2012-02-08:


      2.1 Beam Studies Program \\ This Week: 2012-02-08 Wed


Scheduled Tasks 	Expected 	Actual 	Campaign 	Beam

	Duration 	
	
	Termination

	(h) 	
	
	
Initial fOpts/Allsaves 	0.5 	
	Program 	B & C
C100: Rad. Test <http://opsweb.acc.jlab.org/CSUEApps/atlis/task/11932> 	2 	
	C100 	INJ
Inj M_56 setup <http://opsweb.acc.jlab.org/CSUEApps/atlis/task/11955> 	8 	
	Program 	Halls→ Inj→ Halls
PEPPo Mag Test <http://opsweb.acc.jlab.org/CSUEApps/atlis/task/11979> 	1 	
	PEPPo 	Inj
Restoration 	2 	
	Program
	B&C
Parasitic Hours 	-2 	
	
	
Total 	11.5 	
	
	


-- 
Arne Freyberger
Director of Accelerator Operations
Jefferson Lab           Office: (757) 269-6268
12000 Jefferson Avenue  Cell:   (757) 876-6289
Newport News, VA 23606  Email:  freyberg at jlab.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/bteam/attachments/20120206/3fb9e449/attachment-0002.html>