[Dsg-halla_magnets] Power supply connections

[Pablo Campero Rojas]

Also, do you have a power extension cord to connect the power supply?
________________________________
From: Pablo Campero Rojas
Sent: Monday, September 26, 2022 12:41 PM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Power supply connections

Hello Steven,


Mindy has finished the R-11 communication cable for the power supply and I want to start the communication test, but first  I have a few questions.

I noticed that the power on/off button in one of the two power supplies (located at the top with the current output looped/protected, see attached picture) is not latching in the "On" position. Is this something that was mentioned during the previous test performed?

Which of the two power supply will be used for the magnet low current test?
The power supply in the bottom does not have the current output plug protected, see attached picture.

Is the actual set up for the power supply safe to just plug, power on, and proceed with the communication test?


Thanks,
Pablo



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20220926/a4fce0d4/attachment-0002.html>