[Dsg-ft] [Dsg-internal] FT location in EEL 125

[Amrit Yegneswaran]

dear marco,

as of now, since the schedule calls for the FT move to be in november, 
we do not want to concern ourselves with moving the FT to the corner.
as you point out, if for some scheduling reason the FT move is delayed, 
we may re-consider the option.
amrit

p.s. leaving the backdoor accessible provides an independent entry for 
the  to SVT/MM and RICH.
as the MM schedule is not clear, and the video points out that the RICH 
detector could move in/after/ the MM has been taken into the clean room 
for assembly, it would be prudent to keep both accesses available.


On 8/9/2016 6:16 AM, Marco Battaglieri wrote:
> Dear Amrit and Amanda,
> we watched Walt's video and as far as we understood, the FT area is 
> not affected by the current plan. Are you sure that using the back 
> door will be possible? it would mean to keep free  the present FT area 
> and all the space in front of it (where RICH cabinets would be 
> located, according to the video).
> According to the existing schedule we are moving the FT to the Hall in 
> November. If it is confirmed we will free the area well in time for 
> the beginning of RICH assembly. If the FT move will be delayed, we can 
> think of moving the FT and related equipment to the right side of the 
> room in October-November when we will have people onsite from FT team 
> (Genova, Saclay Edinburgh) since the move implies recabling 
> everything. By the way, this would also imply to (re)move all the 
> cabinets, dark box and other equpment currently present on the right 
> side of the room that does not belong to us (Stepan?)
> Let us know waht you think.
> Cheers
> Marco and Raffaella
>
>
>
> Amrit Yegneswaran wrote:
>> since we do not know when the FT will be moved to the hall, keeping 
>> the FT in the corner would, i guess, provides in addition to the 
>> access to the rear door,  a secluded area where one can test the 
>> system undisturbed, till it is moved to the hall.
>>
>>
>> On 8/8/2016 11:17 AM, Amanda Hoebel wrote:
>>> Dear Marco,
>>>
>>> We have seen a video that Walt Akers made regarding the arrangement 
>>> of EEL-125 for the SVT, MicroMegas, and RICH access to the EEL-124 
>>> clean room. The video can be found via this link: 
>>> https://www.youtube.com/watch?v=W9-A36wYoIE
>>>
>>> If we could make the back roll-up door accessible, the RICH could be 
>>> moved and assembled independently of the SVT and MicroMegas. In 
>>> order to make the back roll-up door accessible, we were wondering if 
>>> the Forward Tagger could be moved to a different area of EEL-125, 
>>> possibly where the HPS equipment is stored. Would it be possible to 
>>> move both the HPS equipment and the Forward Tagger? Thanks in advance.
>>>
>>> Sincerely,
>>> Amanda
>>>
>>>
>>> _______________________________________________
>>> Dsg-ft mailing list
>>> Dsg-ft at jlab.org
>>> https://mailman.jlab.org/mailman/listinfo/dsg-ft
>>> _______________________________________________
>>> Dsg-internal mailing list
>>> Dsg-internal at jlab.org
>>> https://mailman.jlab.org/mailman/listinfo/dsg-internal
>>
>>
>> _______________________________________________
>> Dsg-ft mailing list
>> Dsg-ft at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/dsg-ft
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_ft/attachments/20160809/090a7321/attachment-0002.html>