[Dsg-hallb_magnets] Hall C PC using Hall B License

[Nick Sandoval]

Thanks Pablo,

I too forget sometimes to close and my laptop will sometimes grab a Hall D instead of Hall B or vice versa.  Once(if) all the halls agree to host Rockwell licenses on the same server we would have many to pull from and less prone to such problems.

Thanks,
Nick

----- Original Message -----
From: "Pablo Campero Rojas" <campero at jlab.org>
To: "Nicholas Sandoval" <sandoval at jlab.org>
Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
Sent: Tuesday, August 21, 2018 2:01:28 PM
Subject: Re: [Dsg-hallb_magnets] Hall C PC using Hall B License

Hi Nick, 

I was using inadvertently the two PLC licenses from my "DSG-Hallc-2" PC and "DSGPLC1" PC; I was checking PLC code for Hall B - Solenoid. 

I just closed the PLC software in the two mentioned computers, so now you should able to use them with no problem. 

Thanks, 
Pablo 


From: "Nick Sandoval" <sandoval at jlab.org> 
To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Tuesday, August 21, 2018 12:29:58 PM 
Subject: [Dsg-hallb_magnets] Hall C PC using Hall B License 

Hi All, 

I need to log into Hall B PLC and cannot as a DSG/Hall C pc is using (2) Hall B Licenses. 

Does hall C not have their own licenses? This cannot happen in the middle of the night... 

-Nick 
_______________________________________________ 
Dsg-hallb_magnets mailing list 
Dsg-hallb_magnets at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets