[Dsg-hallb_magnets] MPS Status Bits

[Brian Eng]

Hi Onish,

I suspect I might have asked this in the past, but refresh my memory, did the firmware upgrade or customizations done to the supply change what the status bits are for or is what the manual has still correct? See attached images.

Seems what we're seeing on the PLC from the S1FIRST command (which also isn't in the manual) has bits set that maybe shouldn't be? For example, Bit 24 is set. We also have the interlock sum bit set, but no individual interlock bits.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20221020/aca6ece5/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mps_status.png
Type: image/png
Size: 149183 bytes
Desc: mps_status.png
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20221020/aca6ece5/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: plc_status_1st.png
Type: image/png
Size: 99265 bytes
Desc: plc_status_1st.png
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20221020/aca6ece5/attachment-0003.png>