[Dsg-mvt] Request new manometer for Eel premix gas system + interlock

[Franck Sabatie]

The bottle is now out of gas actually ;)
Thanks Brian !
Franck

Le ven. 9 juin 2017 à 15:12, Brian Eng <beng at jlab.org> a écrit :

> So the problem was just the previous bottle was almost out of gas which is
> why it didn't register on the gauges.
>
> Marc and I moved the old regulator setup (so no changes were made) to a
> new bottle and it works fine, see attached picture.
>
> We're going to work with Matt on getting a lower gauge for the high
> pressure side.
>
>
>
> On Jun 9, 2017, at 9:51 AM, Brian Eng <beng at jlab.org> wrote:
>
> Just to keep everyone in the loop, Matt let us know that we couldn't put a
> lower range gauge on the existing regulator, so that option is out.
>
> However, we found another pressure regulator with the same part number
> that we're going to swap out later today when MVT isn't taking data.
>
> We've confirmed that with this one both the high and low pressure gauges
> display a value; the high isn't much off the peg and barely gets past the
> first mark on the gauge, but it does work.
>
> On Jun 8, 2017, at 7:11 PM, Franck Sabatie <sabatie at jlab.org> wrote:
>
> Brian,
>
> Thanks for your input: I think the current manometer probably has a
> problem then since we never saw anything out of a full premix bottle. 300
> out of 4000 psi we should see.
>
> Franck
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_mvt/attachments/20170609/e43b676a/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_20170609_150645.jpg
Type: image/jpeg
Size: 296297 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_mvt/attachments/20170609/e43b676a/attachment-0002.jpg>