[Dsg-mvt] Ar Purge Question

[Brian Eng]

Okay 2 buttons it is, right now we could flow gas through the mixing system, but it would be somewhat manual compared to the final implementation.

This is for the GUI to make things a bit easier in the future.

I've done some testing with what I had available and it seems reasonable, but the real test will be once we have some gas and can build pressure and have flow.

> On Nov 15, 2017, at 10:19 AM, Aune Stephan <stephan.aune at cea.fr> wrote:
> 
> Hi
> Hi Brian
> 
> Yes Argon purging independent between Barrel and Forward
> 
> Not needed today but tomorrow for >80% sure !
> 
> Stephan
> ________________________________________
> From: Dsg-mvt [dsg-mvt-bounces at jlab.org] on behalf of Brian Eng [beng at jlab.org]
> Sent: Wednesday, November 15, 2017 15:43
> To: dsg-mvt at jlab.org
> Subject: [Dsg-mvt] Ar Purge Question
> 
> Maybe someone from the MVT team can answer this question, but regarding purging the detectors with Ar will this ever be done independently between the forward and barrel trackers?
> 
> I was planning on adding a button to switch the MFC gas to Ar for the purge, but wanted to know if there should be 1 button for both mixes or 2 buttons, one for each mix.
> 
> Thanks