[Dsg-mvt] Mix 2 gas set point

[Brian Eng]

It looks like the WANTGAS PV went away first which is why the flows were set to zero, see the attached plots.

The mixing system was working as intended.

[cid:ACE639F6-7359-4C23-8DDD-41D7BC933114 at jlab.org]

On Jan 8, 2019, at 9:15 AM, Marc Mcmullen <mcmullen at jlab.org<mailto:mcmullen at jlab.org>> wrote:

Hi Maxime,

Is there a reason the Mix 2 gas flow request is set to 0? The mixing system is in "Automatic", if gas is required someone needs to provide a flow set point on the Saclay PLC.

Thanks,
Marc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_mvt/attachments/20190108/a8da409d/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2019-01-08 at 10.01.47 AM.png
Type: image/png
Size: 63914 bytes
Desc: Screen Shot 2019-01-08 at 10.01.47 AM.png
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_mvt/attachments/20190108/a8da409d/attachment-0002.png>