[Dsg-rich] RICH ERR recommendations

[Marco Contalbrigo]

Thank you so much! Marco.

On Thu, 27 Oct 2016, Tyler Lemon wrote:

> Dear Marco,
> 
> Regarding your questions, the answers are below in-line:
> 
> > On 10/27/2016 10:24 AM, Marco Contalbrigo wrote:
> >       Dear Tyler,
> >       one of the RICH ERR recommendations is
> >
> >       The space for compressors and cabling must be clearly identified and
> >       reserved for RICH use.
> >
> >       Do you clairfy the question about the height of the air cooling
> >       tank, in particular concerning the clearance for the Hall-B crane ?
> 
> Please see George's email. In short, there is no concern with crane clearance.
> 
> >
> >       Have you any picture of the space reserved for tank and compressor ?
> 
> Top Deck of Forward Carriage is reserved for air compressors, tank and valve panel. Pictures of location attached.
> "Forward Carriage, Top Deck, Beam Right.JPG" is where the air tank and valve panel will be.
> "Forward Carriage, Top Deck, Beam Left.JPG" is where the two compressors will be. The brown tank in the picture will be
> moved.
> 
> >
> >       Have you any picture of tank+gas panel and air compressor ?
> Pictures attached.
> "RICH gas tank with Air Cooling Valve Panel on front, Nitrogen Valve Panel on Right Side.JPG" shows the air tank with
> the valve panels for Air Cooling on front and Nitrogen Valve panel on right
> "Nitrogen Valve Panel on side of RICH gas tank.JPG" shows the nitrogen valve panel on the side of the air tank
> "RICH air compressor in EEL 124.JPG" is one compressor. The second compressor has already been put at a holding location
> in Hall B.
> >
> 
> Best regards,
> Tyler
> 
>