[Dsg-rich] RICH part drawings to check before fabrication

[Tyler Lemon]

Hello Bob, 

As we discussed on the phone, attached are the three drawings sets for the RICH parts that DSG would like checked by Hall B Engineering. 

It would be urgent to check these as soon as possible to avoid any delay in the parts' fabrication. We expect that the procurement of the fabrication contract will be complete in about one week. 

Best regards, 
Tyler 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170816/ef63f0c6/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Load Test - All pdf in One File.pdf
Type: application/pdf
Size: 3290332 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170816/ef63f0c6/attachment-0003.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Strongback-RICH Interfaces Parts - All pdf in One File.pdf
Type: application/pdf
Size: 3119902 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170816/ef63f0c6/attachment-0004.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Trolley For RICH_Additional Structures - All pdf in One File_updated.pdf
Type: application/pdf
Size: 8365931 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170816/ef63f0c6/attachment-0005.pdf>