[Dsg-rich] Updated Drawings for RICH Stiffening Tool additional parts

[Marc McMullen]

Hi Bob,

Attached are the three sets of updated drawings produced by Dario 
Orecchini of INFN. He has added changes in accordance with your 
comments. Could you please review them and confirm that the changes are 
made per your comments.

Per Patrizia's request, Jlab procurement is waiting for me to authorize 
them to proceed with the release of the associated requisitions. If 
these drawings are complete I will send them to procurement and they can 
order the fabrications.

Thanks,

-- 
Marc McMullen
Detector Support Group
757-269-7738

-------------- next part --------------
A non-text attachment was scrubbed...
Name: RICH-Strongback Interface Parts_All Sheets_082517.pdf
Type: application/pdf
Size: 3114611 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170825/3ed47458/attachment-0003.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Stiffening Tool Load Test_All Pdf_082517.pdf
Type: application/pdf
Size: 4165276 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170825/3ed47458/attachment-0004.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Trolley For RICH_All Sheets_082517.pdf
Type: application/pdf
Size: 7320913 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170825/3ed47458/attachment-0005.pdf>