[Dsg-rich] Nitrogen volume humidity sensor #7

[Tyler Lemon]

Hello, 

December 12 at ~1:00PM, nitrogen volume humidity sensor #7 jumped to ~60% humidity. This humidity reading appears to be incorrect as nitrogen volume humidity sensor #14 on the same board as humidity #7 remained lower near the value of all other humidity sensors. 

Since humidity sensor #7 does not appear to be working and its sensor board is in a place accessible while the front panels are removed from RICH we have two options: 

Option 1 is to remove the bad humidity sensor and solder a new one in its place. Mindy could remove the bad sensor and replace it with a new sensor. 

Option 2 is to remove the entire sensor board and replace it with a spare board and cable that we have ready to go. The spare board would need to be epoxied in place on the detector shell if this option is chosen. 

Please let us know which option would be preferred so we can fix the issue. 

Best regards, 
Tyler 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171214/f98c3c3d/attachment.html>