[Dsg-rich] dimensions of RICH template

[Tyler Lemon]

Hello Marco, 

As advised in your previous email, we have measured the dimensions of the RICH template from the four vertical pieces. Measurements are in table below and also in attached diagram. 

Since the drilling template is completely assembled and the anchor holes drilled, could DSG continue with the construction of the assembly structure? Completing the structure earlier would allow more time to perform the load test required for the TOSP and ensure the detector shell can be assembled without delay when INFN collaborators arrive. Please let us know. 

Best regards, 
Tyler 

Measurement 
	
Front 
(inches) 
	
Left 
(inches) 
	
Back 
(inches) 
	
Right 
(inches) 
	
Diagonal 1 
(Front Right to Back Left) 
(inches) 
	
Diagonal 2 
(Front Left to Back Right) 
(inches) 

Actual Structure 
	174.62 
	107.12 
	174.87 
	107.12 
	204.87 
	205.37 

NX 9.0 model 
	174.40 
	107.08 
	174.40 
	107.08 
	204.72 
	204.72 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170220/66eef18e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: RICH_post-to-post.pdf
Type: application/pdf
Size: 6549 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170220/66eef18e/attachment.pdf>