[Dsg-rich] RICH detector

[Marc McMullen]

Thanks Bobby 

Marc McMullen 
Physics Division 
Detector Support Group 
7738 


From: "Bobby Thomas" <thomasb at jlab.org> 
To: "Marc McMullen" <mcmullen at jlab.org> 
Cc: "Bob Sperlazza" <sperlazz at jlab.org>, "Suresh Chandra" <chandra at jlab.org>, "Thomas Renzo" <renzo at jlab.org> 
Sent: Monday, January 23, 2017 11:23:41 AM 
Subject: Re: RICH detector 

Thank you Marc. I have spoken with our engineering dept. You may proceed in assembly, however, the assembly will have to be QA'd and load tested before use. The assembly will need to be load tested to 2,000 lbs. with the equipment and rigging to be used for assembly of the Rich detector. Thank you, Joe. 

----- Original Message ----- 
From: "Marc McMullen" <mcmullen at jlab.org> 
To: "Bobby Thomas" <thomasb at jlab.org>, "dsg-rich" <dsg-rich at jlab.org> 
Sent: Monday, January 23, 2017 9:04:01 AM 
Subject: Re: RICH detector 

GR-1000 


On 1/23/2017 8:45 AM, Bobby Thomas wrote: 
> Good morning Marc, Do you have the model # for the hand winch that is going to be used? 

-- 
Marc McMullen 
Detector Support Group 
757-269-7738 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170123/c29db3fb/attachment-0002.html>