[Dsg-rich] RICH detector

[Rusty Sprouse]

Will review this pm
Sorry for any delay

Sent from my iPhone

> On Jan 23, 2017, at 12:11 PM, Marc McMullen <mcmullen at jlab.org> wrote:
> 
> Hi Bobby and Rusty,
> 
> I am just checking the progress on the TOSP for RICH detector assembly. Bobby has apparently checked the procedure/drawings for the aerial crane portion, but we still need a signature for that, and tthe cranes/hoists from Rusty.
> 
> Marc McMullen
> Physics Division
> Detector Support Group
> 7738
> 
> From: "Marc McMullen" <mcmullen at jlab.org>
> To: "Bobby Thomas" <thomasb at jlab.org>
> Cc: "Bob Sperlazza" <sperlazz at jlab.org>, "Suresh Chandra" <chandra at jlab.org>, "Thomas Renzo" <renzo at jlab.org>, dsg-rich at jlab.org
> Sent: Monday, January 23, 2017 12:04:26 PM
> Subject: Re: RICH detector
> 
> Thanks Bobby
> 
> Marc McMullen
> Physics Division
> Detector Support Group
> 7738
> 
> From: "Bobby Thomas" <thomasb at jlab.org>
> To: "Marc McMullen" <mcmullen at jlab.org>
> Cc: "Bob Sperlazza" <sperlazz at jlab.org>, "Suresh Chandra" <chandra at jlab.org>, "Thomas Renzo" <renzo at jlab.org>
> Sent: Monday, January 23, 2017 11:23:41 AM
> Subject: Re: RICH detector
> 
> Thank you Marc. I have spoken with our engineering dept. You may proceed in assembly, however, the assembly will have to be QA'd and load tested before use. The assembly will need to be load tested to 2,000 lbs. with the equipment and rigging to be used for assembly of the Rich detector. Thank you, Joe.
> 
> ----- Original Message -----
> From: "Marc McMullen" <mcmullen at jlab.org>
> To: "Bobby Thomas" <thomasb at jlab.org>, "dsg-rich" <dsg-rich at jlab.org>
> Sent: Monday, January 23, 2017 9:04:01 AM
> Subject: Re: RICH detector
> 
> GR-1000
> 
> 
> On 1/23/2017 8:45 AM, Bobby Thomas wrote:
> > Good morning Marc, Do you have the model # for the hand winch that is going to be used?
> 
> -- 
> Marc McMullen
> Detector Support Group
> 757-269-7738
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170123/8afed8f8/attachment-0002.html>