[Dsg-rich] Drilling Bits for CFRP material

[Tomassini Sandro]

Marc,

we need help, we need to buy few bits like the one in the picture below. 
These bits are especially designed to drill CFRP materials.

We need to drill about 15 holes 2.5 mm diameter (0.098") on CFRP and to 
do this we need at least 3 bits to procure (in case one or more break...)

Here below you can find the link to the product

https://urldefense.proofpoint.com/v2/url?u=http-3A__www.sandvik.coromant.com_en-2Dus_industrysolutions_aerospace_composite_pages_vertical-2Dtail.aspx&d=DwICbA&c=lz9TcOasaINaaC3U7FbMev2lsutwpI4--09aP8Lu18s&r=9YtCiIg5kE6YCo5iFAyFiMgzNCONVcBowotEOgGZ4Co&m=61Utg4y7ljIHSMjoy1J41ZYWxn4WOkaTHm6xnII6CiA&s=OXprMrMz-1Y2e9nOXAWZdkXfq6NhFq5VMXA4QhbqVVU&e= 

Type: corodrill 452

Ordering code: 452.1-0250-044A0-C H10F

Below a snapshot of the online catalogue.

The total cost should be of the order of 110$.

Let me know if everything is clear or not

Many thanks

Sandro


-- 
-----------------------------------------
Dr. Eng. Sandro Tomassini
Istituto Nazionale di Fisica Nucleare
Laboratori Nazionali di Frascati
---Research Division---
P.O.Box 13 00044 Frascati (RM) Italy
Tel. office: +39 06 9403 2919/8089
Fax: +39 06 94032256
e-mail: sandro.tomassini at lnf.infn.it
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.lnf.infn.it_&d=DwICbA&c=lz9TcOasaINaaC3U7FbMev2lsutwpI4--09aP8Lu18s&r=9YtCiIg5kE6YCo5iFAyFiMgzNCONVcBowotEOgGZ4Co&m=61Utg4y7ljIHSMjoy1J41ZYWxn4WOkaTHm6xnII6CiA&s=v5CQ0pprrmWOg30MrHAhcuUN_gxGdej9T2pR7_97BUE&e= 
-----------------------------------------
-- 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170731/e3487389/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: djjeimaphabolhel.png
Type: image/png
Size: 138999 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170731/e3487389/attachment-0001.png>