[Dsg-rich] Jlab Welding certifications

[Michael Martin]

Marc, see attached welding documents collected from G and R Metals this morning during our visit. All are acceptable. 

What we received was: 
WPS (welding procedure specification) 
PQR (procedure qualification results with test records) 
WPQR (welding personnel qualification record) 
AWS CWI (certifications for the certified inspector they will be using) 

What we will still need to get from them once the inspection is done by their inspector will be a Visual Inspection Report with inspection results from their contracted CWI (signed and stamped). 
I would like to get this before they ship if we can or at delivery. This can be scanned and sent by e-mail and would be acceptable. 

You mentioned additional fabrications are pending with G and R Metals so if they use the same welder and welding procedure then all we would need from them would be a inspection report for the additional fabrications. 
If they use a different welding procedure or different welders then we need similar documents for these procedures and welders in addition to the inspection report. 

Thank you for working with us and understanding the fed guidelines we must follow. 




Michael Martin 
Senior QA/QC Technical Specialist 
ESH&Q QA/CI Group 
757/269/5515 Office 
757/303/7942 Cell/Page 


From: "Marc McMullen" <mcmullen at jlab.org> 
To: "Michael Martin" <mjmartin at jlab.org> 
Cc: "Ed Folts" <folts at jlab.org>, "Ryan Bruce" <ryan at gandrmetals.com>, "dsg-rich" <dsg-rich at jlab.org> 
Sent: Thursday, July 13, 2017 3:11:03 PM 
Subject: Re: [Dsg-rich] Jlab Welding certifications 



Mike, we are actually not leaving the lab until 9:45...so closer to 10:15 at GandR if you are meeting us. 

On 7/13/2017 2:51 PM, Marc McMullen wrote: 




That is correct 

On 7/13/2017 2:38 PM, Michael Martin wrote: 

BQ_BEGIN

That's good news. So if our trip is still on I shall plan to meet your party there at 9:45 Monday? 

Sent from my iPhone 

On Jul 13, 2017, at 2:29 PM, Marc McMullen < mcmullen at jlab.org > wrote: 


BQ_BEGIN



correction 

he did not see any show stopper 

On 7/13/2017 2:27 PM, Marc McMullen wrote: 

BQ_BEGIN


Hi Sandro, 

Ryan from GandR just called me and let me know that he did see any show stoppers with the specification document. However, he did say that the contract between INFN and GandR did not specify the acceptance and inspection by an AWS Certified Weld Inspector which they would have to contract out. This addition would change the price by "not a large amount of money", he has already contacted someone and is working on an adjustment to the price. Once this has been determined he will respond to INFN appropriately. 

Once he has responded, I suggest a meeting with Mike Martin to review the status. 

Our visit is still planned for Monday morning. 


Regards, 

Marc 
On 7/13/2017 9:09 AM, Marc McMullen wrote: 

BQ_BEGIN


Good Morning, 

I spoke with Ryan from GandR this morning to confirm he received the document. I asked that he respond appropriately after reviewing it. 

Regards, 

Marc 

On 7/12/2017 4:42 PM, Marc McMullen wrote: 

BQ_BEGIN
Hi Ryan, 

I have attached Jlab the requirements for welding fabricators. Please review the document sent from our EHS&Q department. 

If you have any questions on this, Mike Martin is cc'd on this email, he can answer any specific questions related to the document. 

Regards, 

Marc 



_______________________________________________
Dsg-rich mailing list Dsg-rich at jlab.org https://mailman.jlab.org/mailman/listinfo/dsg-rich 





_______________________________________________
Dsg-rich mailing list Dsg-rich at jlab.org https://mailman.jlab.org/mailman/listinfo/dsg-rich 

BQ_END

-- 
Marc McMullen
Detector Support Group
757-269-7738 


_______________________________________________
Dsg-rich mailing list Dsg-rich at jlab.org https://mailman.jlab.org/mailman/listinfo/dsg-rich 

BQ_END

-- 
Marc McMullen
Detector Support Group
757-269-7738 

BQ_END

BQ_END

-- 
Marc McMullen
Detector Support Group
757-269-7738 


_______________________________________________
Dsg-rich mailing list Dsg-rich at jlab.org https://mailman.jlab.org/mailman/listinfo/dsg-rich 

BQ_END

-- 
Marc McMullen
Detector Support Group
757-269-7738 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170717/81ca9b98/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Rich Module Lifting and Stiffening Tool Welding Documents.pdf
Type: application/pdf
Size: 614446 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170717/81ca9b98/attachment-0002.pdf>