[Dsg-rich] Jlab Welding certifications

[Marc McMullen]

Thanks Mike,

We will work with GandR to get the invoice for the welding inspection 
and report. That will complete the necessary documentation need to stay 
in compliance.

Marc


On 7/17/2017 11:59 AM, Michael Martin wrote:
> Marc, see attached welding documents collected from G and R Metals 
> this morning during our visit. All are acceptable.
>
> What we received was:
> WPS (welding procedure specification)
> PQR (procedure qualification results with test records)
> WPQR (welding personnel qualification record)
> AWS CWI (certifications for the certified inspector they will be using)
>
> What we will still need to get from them once the inspection is done 
> by their inspector will be a Visual Inspection Report with inspection 
> results from their contracted CWI (signed and stamped).
> I would like to get this before they ship if we can or at delivery. 
> This can be scanned and sent by e-mail and would be acceptable.
>
> You mentioned additional fabrications are pending with G and R Metals 
> so if they use the same welder and welding procedure then all we would 
> need from them would be a inspection report for the additional 
> fabrications.
> If they use a different welding  procedure or different welders then 
> we need similar documents for these procedures and welders in addition 
> to the inspection report.
>
> Thank you for working with us and understanding the fed guidelines we 
> must follow.
>
>
>
>
> Michael Martin
> Senior QA/QC Technical Specialist
> ESH&Q QA/CI Group
> 757/269/5515 Office
> 757/303/7942 Cell/Page
>
> ------------------------------------------------------------------------
> *From: *"Marc McMullen" <mcmullen at jlab.org>
> *To: *"Michael Martin" <mjmartin at jlab.org>
> *Cc: *"Ed Folts" <folts at jlab.org>, "Ryan Bruce" 
> <ryan at gandrmetals.com>, "dsg-rich" <dsg-rich at jlab.org>
> *Sent: *Thursday, July 13, 2017 3:11:03 PM
> *Subject: *Re: [Dsg-rich] Jlab Welding certifications
>
> Mike, we are actually not leaving the lab until 9:45...so closer to 
> 10:15 at GandR if you are meeting us.
>
>
> On 7/13/2017 2:51 PM, Marc McMullen wrote:
>
>     That is correct
>
>
>     On 7/13/2017 2:38 PM, Michael Martin wrote:
>
>         That's good news. So if our trip is still on I shall plan to
>         meet your party there at 9:45 Monday?
>
>         Sent from my iPhone
>
>         On Jul 13, 2017, at 2:29 PM, Marc McMullen <mcmullen at jlab.org
>         <mailto:mcmullen at jlab.org>> wrote:
>
>             correction
>
>             he *did not *see any show stopper
>
>
>             On 7/13/2017 2:27 PM, Marc McMullen wrote:
>
>                 Hi Sandro,
>
>                 Ryan from GandR just called me and let me know that he
>                 did see any show stoppers with the specification
>                 document. However, he did say that the contract
>                 between INFN and GandR did not specify the acceptance
>                 and inspection by an AWS Certified Weld Inspector
>                 which they would have to contract out. This addition
>                 would change the price by "not a large amount of
>                 money", he has already contacted someone and is
>                 working on an adjustment to the price. Once this has
>                 been determined he will respond to INFN appropriately.
>
>                 Once he has responded, I suggest a meeting with Mike
>                 Martin to review the status.
>
>                 Our visit is still planned for Monday morning.
>
>                 Regards,
>
>                 Marc
>
>                 On 7/13/2017 9:09 AM, Marc McMullen wrote:
>
>                     Good Morning,
>
>                     I spoke with Ryan from GandR this morning to
>                     confirm he received the document. I asked that he
>                     respond appropriately after reviewing it.
>
>                     Regards,
>
>                     Marc
>
>
>                     On 7/12/2017 4:42 PM, Marc McMullen wrote:
>
>                         Hi Ryan,
>
>                         I have attached Jlab the requirements for
>                         welding fabricators. Please review the
>                         document sent from our EHS&Q department.
>
>                         If you have any questions on this, Mike Martin
>                         is cc'd on this email, he can answer any
>                         specific questions related to the document.
>
>                         Regards,
>
>                         Marc
>
>
>
>                         _______________________________________________
>                         Dsg-rich mailing list
>                         Dsg-rich at jlab.org
>                         https://mailman.jlab.org/mailman/listinfo/dsg-rich
>
>
>
>
>                     _______________________________________________
>                     Dsg-rich mailing list
>                     Dsg-rich at jlab.org
>                     https://mailman.jlab.org/mailman/listinfo/dsg-rich
>
>
>                 -- 
>                 Marc McMullen
>                 Detector Support Group
>                 757-269-7738
>
>
>
>                 _______________________________________________
>                 Dsg-rich mailing list
>                 Dsg-rich at jlab.org
>                 https://mailman.jlab.org/mailman/listinfo/dsg-rich
>
>
>             -- 
>             Marc McMullen
>             Detector Support Group
>             757-269-7738
>
>
>     -- 
>     Marc McMullen
>     Detector Support Group
>     757-269-7738
>
>
>
>     _______________________________________________
>     Dsg-rich mailing list
>     Dsg-rich at jlab.org
>     https://mailman.jlab.org/mailman/listinfo/dsg-rich
>
>
> -- 
> Marc McMullen
> Detector Support Group
> 757-269-7738
>

-- 
Marc McMullen
Detector Support Group
757-269-7738

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170717/9e0df086/attachment-0002.html>