[Dsg-rich] Status of connecting ground wire of Bertha for RICH Compressor - SR #61537

[Walt Akers]

Confirmed:

The grounding wire has been connecting to the structural girder
on the center of the west wall.  Thanks to Facilities for handling
this one so quickly.

Walt

Walt Akers wrote:
> Good Morning Tyler:
>
> I spoke with Josh Caterbone yesterday, and he believed that the
> work could be completed as early as today.  I am going over now
> to check to see if it has already been performed.
>
> Walt
>
> Tyler Lemon wrote:
>> Hello Walt,
>>
>> What is the status of Brian's request to connect ground wire of 
>> Bertha for the RICH Compressor? (Service request link: 
>> https://misportal.jlab.org/work/viewServiceRequest.jsf?id=61537)
>>
>> Will the service request be complete by 7/28/2017? We are trying to 
>> schedule a time for the compressor manufacturer to come to JLab for 
>> its first start-up. The manufacturer is available to come on 7/28/2017.
>>
>> Best regards,
>> Tyler
>>
>> ------------------------------------------------------------------------
>> *From: *"Brian Eng" <beng at jlab.org>
>> *To: *"Amrit Yegneswaran" <yeg at jlab.org>
>> *Cc: *"dsg-rich" <dsg-rich at jlab.org>, "Jubb Jubb" <jasonw at jlab.org>, 
>> "Walt Akers" <akers at jlab.org>
>> *Sent: *Monday, July 17, 2017 11:08:54 AM
>> *Subject: *Re: [Dsg-rich] Power for air compressor in EEL rm 125 
>> (Bertha Unit)
>>
>> Hi Walt,
>>
>> Request submitted: 
>> https://misportal.jlab.org/work/viewServiceRequest.jsf?id=61537
>>
>> The reason we aren't doing it ourselves is because the common ground 
>> box in that room didn't have any obvious connectors we could use 
>> (there's two wires that just disappear into the wall), so while it 
>> probably is a simple matter of attaching the wire to something 
>> existing, since no one in the group is an electrician we figured it 
>> would be better to have them do it in order to make sure it was done 
>> correctly/safely.
>> -- 
>> Brian Eng
>> Detector Support Group
>> 757-269-6018
>>
>> > On Jul 17, 2017, at 10:34 AM, Amrit Yegneswaran <yeg at jlab.org> wrote:
>> >
>> > thanks walt
>> > amrit
>> >
>> > From: "Walt Akers" <akers at jlab.org>
>> > To: "Brian Eng" <beng at jlab.org>, "Jubb Jubb" <jasonw at jlab.org>
>> > Cc: "dsg-rich" <dsg-rich at jlab.org>
>> > Sent: Monday, July 17, 2017 10:30:24 AM
>> > Subject: Re: [Dsg-rich] Power for air compressor in EEL rm 125 
>> (Bertha Unit)
>> >
>> > Hey Brian:
>> >
>> > Go to this link and fill out a work request...
>> >
>> > https://misportal.jlab.org/work/index.jsf
>> >
>> > Once you've entered it, let me know and I'll work with
>> > Jason to see if we can have the connection done as soon
>> > as possible.
>> >
>> > Having spoken to Doug this morning, this is probably work
>> > that can be done by George Jacobs and doesn't require an
>> > actual electrician.  Is there a reason that the grounding
>> > connection is not being done by him or one of his folks?
>> >
>> > Walt
>>
>>
>> _______________________________________________
>> Dsg-rich mailing list
>> Dsg-rich at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/dsg-rich
>