[Dsg-rich] Status of connecting ground wire of Bertha for RICH Compressor - SR #61537

[Patrizia Rossi]

Thank you all!

patrizia
---------------------------------------------------
# Patrizia Rossi
# Jefferson Lab 
# 12000 Jefferson Avenue
# Suite 5
# Newport News VA 23606 (USA)
# e-mail: rossi at jlab.org
# phone: +1 (757) 269 7740
# fax: + 1 (757) 269 5800
# cell: +1 (757) 528 7606




> On 18/lug/2017, at 11:07, Walt Akers <akers at jlab.org> wrote:
> 
> Confirmed:
> 
> The grounding wire has been connecting to the structural girder
> on the center of the west wall.  Thanks to Facilities for handling
> this one so quickly.
> 
> Walt
> 
> Walt Akers wrote:
>> Good Morning Tyler:
>> 
>> I spoke with Josh Caterbone yesterday, and he believed that the
>> work could be completed as early as today.  I am going over now
>> to check to see if it has already been performed.
>> 
>> Walt
>> 
>> Tyler Lemon wrote:
>>> Hello Walt,
>>> 
>>> What is the status of Brian's request to connect ground wire of Bertha for the RICH Compressor? (Service request link: https://misportal.jlab.org/work/viewServiceRequest.jsf?id=61537)
>>> 
>>> Will the service request be complete by 7/28/2017? We are trying to schedule a time for the compressor manufacturer to come to JLab for its first start-up. The manufacturer is available to come on 7/28/2017.
>>> 
>>> Best regards,
>>> Tyler
>>> 
>>> ------------------------------------------------------------------------
>>> *From: *"Brian Eng" <beng at jlab.org>
>>> *To: *"Amrit Yegneswaran" <yeg at jlab.org>
>>> *Cc: *"dsg-rich" <dsg-rich at jlab.org>, "Jubb Jubb" <jasonw at jlab.org>, "Walt Akers" <akers at jlab.org>
>>> *Sent: *Monday, July 17, 2017 11:08:54 AM
>>> *Subject: *Re: [Dsg-rich] Power for air compressor in EEL rm 125 (Bertha Unit)
>>> 
>>> Hi Walt,
>>> 
>>> Request submitted: https://misportal.jlab.org/work/viewServiceRequest.jsf?id=61537
>>> 
>>> The reason we aren't doing it ourselves is because the common ground box in that room didn't have any obvious connectors we could use (there's two wires that just disappear into the wall), so while it probably is a simple matter of attaching the wire to something existing, since no one in the group is an electrician we figured it would be better to have them do it in order to make sure it was done correctly/safely.
>>> -- 
>>> Brian Eng
>>> Detector Support Group
>>> 757-269-6018
>>> 
>>> > On Jul 17, 2017, at 10:34 AM, Amrit Yegneswaran <yeg at jlab.org> wrote:
>>> >
>>> > thanks walt
>>> > amrit
>>> >
>>> > From: "Walt Akers" <akers at jlab.org>
>>> > To: "Brian Eng" <beng at jlab.org>, "Jubb Jubb" <jasonw at jlab.org>
>>> > Cc: "dsg-rich" <dsg-rich at jlab.org>
>>> > Sent: Monday, July 17, 2017 10:30:24 AM
>>> > Subject: Re: [Dsg-rich] Power for air compressor in EEL rm 125 (Bertha Unit)
>>> >
>>> > Hey Brian:
>>> >
>>> > Go to this link and fill out a work request...
>>> >
>>> > https://misportal.jlab.org/work/index.jsf
>>> >
>>> > Once you've entered it, let me know and I'll work with
>>> > Jason to see if we can have the connection done as soon
>>> > as possible.
>>> >
>>> > Having spoken to Doug this morning, this is probably work
>>> > that can be done by George Jacobs and doesn't require an
>>> > actual electrician.  Is there a reason that the grounding
>>> > connection is not being done by him or one of his folks?
>>> >
>>> > Walt
>>> 
>>> 
>>> _______________________________________________
>>> Dsg-rich mailing list
>>> Dsg-rich at jlab.org
>>> https://mailman.jlab.org/mailman/listinfo/dsg-rich
>> 
> 
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170718/44508743/attachment-0002.html>