[Dsg-rich] Status of connecting ground wire of Bertha for RICH Compressor - SR #61537

[Amrit Yegneswaran]

thanks walt 


From: "Walt Akers" <akers at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org>, "dsg-rich" <dsg-rich at jlab.org>, "Joshua Caterbone" <joshuac at jlab.org> 
Sent: Tuesday, July 18, 2017 11:01:56 AM 
Subject: Re: [Dsg-rich] Status of connecting ground wire of Bertha for RICH Compressor - SR #61537 

Good Morning Tyler: 

I spoke with Josh Caterbone yesterday, and he believed that the 
work could be completed as early as today. I am going over now 
to check to see if it has already been performed. 

Walt 

Tyler Lemon wrote: 
> Hello Walt, 
> 
> What is the status of Brian's request to connect ground wire of Bertha 
> for the RICH Compressor? (Service request link: 
> https://misportal.jlab.org/work/viewServiceRequest.jsf?id=61537) 
> 
> Will the service request be complete by 7/28/2017? We are trying to 
> schedule a time for the compressor manufacturer to come to JLab for 
> its first start-up. The manufacturer is available to come on 7/28/2017. 
> 
> Best regards, 
> Tyler 
> 
> ------------------------------------------------------------------------ 
> *From: *"Brian Eng" <beng at jlab.org> 
> *To: *"Amrit Yegneswaran" <yeg at jlab.org> 
> *Cc: *"dsg-rich" <dsg-rich at jlab.org>, "Jubb Jubb" <jasonw at jlab.org>, 
> "Walt Akers" <akers at jlab.org> 
> *Sent: *Monday, July 17, 2017 11:08:54 AM 
> *Subject: *Re: [Dsg-rich] Power for air compressor in EEL rm 125 
> (Bertha Unit) 
> 
> Hi Walt, 
> 
> Request submitted: 
> https://misportal.jlab.org/work/viewServiceRequest.jsf?id=61537 
> 
> The reason we aren't doing it ourselves is because the common ground 
> box in that room didn't have any obvious connectors we could use 
> (there's two wires that just disappear into the wall), so while it 
> probably is a simple matter of attaching the wire to something 
> existing, since no one in the group is an electrician we figured it 
> would be better to have them do it in order to make sure it was done 
> correctly/safely. 
> -- 
> Brian Eng 
> Detector Support Group 
> 757-269-6018 
> 
> > On Jul 17, 2017, at 10:34 AM, Amrit Yegneswaran <yeg at jlab.org> wrote: 
> > 
> > thanks walt 
> > amrit 
> > 
> > From: "Walt Akers" <akers at jlab.org> 
> > To: "Brian Eng" <beng at jlab.org>, "Jubb Jubb" <jasonw at jlab.org> 
> > Cc: "dsg-rich" <dsg-rich at jlab.org> 
> > Sent: Monday, July 17, 2017 10:30:24 AM 
> > Subject: Re: [Dsg-rich] Power for air compressor in EEL rm 125 
> (Bertha Unit) 
> > 
> > Hey Brian: 
> > 
> > Go to this link and fill out a work request... 
> > 
> > https://misportal.jlab.org/work/index.jsf 
> > 
> > Once you've entered it, let me know and I'll work with 
> > Jason to see if we can have the connection done as soon 
> > as possible. 
> > 
> > Having spoken to Doug this morning, this is probably work 
> > that can be done by George Jacobs and doesn't require an 
> > actual electrician. Is there a reason that the grounding 
> > connection is not being done by him or one of his folks? 
> > 
> > Walt 
> 
> 
> _______________________________________________ 
> Dsg-rich mailing list 
> Dsg-rich at jlab.org 
> https://mailman.jlab.org/mailman/listinfo/dsg-rich 

_______________________________________________ 
Dsg-rich mailing list 
Dsg-rich at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-rich 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170718/1edbed12/attachment-0002.html>