[Dsg-rich] Hall B Rich - Exit Window

[Kevin Bailey]

Hello,

 

I have questions that effect our part in the Hall B RICH assembly, perhaps
you can help. 

 

We will need to drill some of the frame mounting holes as we assemble the
frame. It would be best to have access to a drill press. Do I need to
arrange anything to have access to one?

 

The Rich Exit Window is similar to the LTCC window, a Tedlar/Mylar sandwich,
on a multi part aluminum frame. The frame will be glued together using a
construction epoxy/acrylic or similar. The adhesive will likely be cartridge
based with a mixing nozzle. I'm still looking into picking the exact
product. Please share if you have some experience.   Do I need to arrange
anything for working with glue?

 

The fabric will be glued to the frame once assembled. I understand some
space is available for assembling the Rich detector. Do you know if there is
sufficient space to layout and glue the fabric to the panel? I am hoping
there are some people familiar with the LTCC windows and can lend some
guidance or assistance in getting the fabric attached. 

 

Thank you,

Kevin

 

 

Kevin Bailey

Physics Division

Argonne National Laboratory

9700 S Cass Ave.

Argonne, IL 60439

 

Phone (630) 252-4036

Kevin_bailey at anl.gov

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170301/36afcdb8/attachment.html>