[Dsg-rich] 3D Print componets

[Dario Orecchini]

Hi Seungjoon,

as anticipate, attached you'll find other components to realize by 3D 
Printer.
For each of the components must be done only one piece.
For the component, "Cooling Pipe Lower Support Link", I'm not sure if 
it's length is
inside the capacity of the printer .... let me know.

Thanks so much for your collaboration,
best regards
Dario

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Cooling Pipe Lower Support_Link.stp
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171110/73bca60f/attachment-0004.ksh>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Fiber Support Backside Central.stp
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171110/73bca60f/attachment-0005.ksh>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Fiber Support_Dx.stp
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171110/73bca60f/attachment-0006.ksh>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Fiber Support_Sx.stp
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171110/73bca60f/attachment-0007.ksh>