[Dsg-rich] Second leak test this morning

[Tyler Lemon]

Sandro said the air was coming out of the bubbler at too high a rate and requested the flow rate be reduced. 

Flow is now set to ~90 slm. 


From: "Brian Eng" <beng at jlab.org> 
To: "Tomassini Sandro" <sandro.tomassini at lnf.infn.it> 
Cc: "dsg-rich" <dsg-rich at jlab.org> 
Sent: Friday, November 3, 2017 10:09:41 AM 
Subject: Re: [Dsg-rich] Second leak test this morning 

Tyler and I turned on the fans (both are on their highest setting) for the epanel. 

The air compressor is now connected to the N2 volume and is currently flowing ~150 slm. 

----- Original Message ----- 
> From: "Tomassini Sandro" <sandro.tomassini at lnf.infn.it> 
> To: "dsg-rich" <dsg-rich at jlab.org> 
> Sent: Friday, November 3, 2017 8:09:20 AM 
> Subject: [Dsg-rich] Second leak test this morning 

> Dear all 
> As agreed with Valery yesterday, this morning we have the compressor available 
> to perform the second leak test after the improvement of the gasket on the 
> frontal panel. 
> It is needed to connect the compressor to the nitrogen line. 
> Many thanks 
> Sandro 
_______________________________________________ 
Dsg-rich mailing list 
Dsg-rich at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-rich 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20171103/36238b6f/attachment-0002.html>