[Dsg-rich] Upper Frontal Panel Tool

[dario.orecchini at lnf.infn.it]

Hi George,
How discussed with you some days ago, we had improved the tool devoted to the assembling of the RICH frontal panels.
The tool has been reinforced with additional bars in order to improve it’s stiffness.
The purchase of these components it’s on going.
I need from you one more information. 
Actually the eyebolts provided are metric M6, but surely you will use the swivel eyebolts as usual in JLab.
In order to modify the threated holes on the support plates, which dimension of them you are expected to use?
To be more clear I attach some pictures.

Best regards
Dario

Sent from Mail for Windows 10

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171002/038c34cd/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Upper Panel Support Tool_1.JPG
Type: image/jpeg
Size: 129281 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171002/038c34cd/attachment-0003.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Upper Panel Support Tool_2.JPG
Type: image/jpeg
Size: 212246 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171002/038c34cd/attachment-0004.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Eyebolt.JPG
Type: image/jpeg
Size: 132592 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171002/038c34cd/attachment-0005.jpe>