[Dsg-rich] Entrance panels Assembly Tools Update

[Dario Orecchini]

Hi George,
attached the drawings of the "assembly tools" modified with the 
implementation of additional stiffening profiles.
Furthermore, I confirm that a second tool will be devoted to the lower 
panel.
The present tool will be dedicated to the upper panel.
The order for the aluminum profiles is followed by Marc.
In the drawings, the weight and the theoretical center of gravity have 
been specified.

Let me know if you need further information,

Best regards, Dario
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Lower Panel - Mounting Tool.pdf
Type: application/pdf
Size: 1560988 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171009/3bf9f8e8/attachment-0004.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Lower Panel - Mounting Tool_Assembly.pdf
Type: application/pdf
Size: 2754564 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171009/3bf9f8e8/attachment-0005.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Upper Panel - Mounting Tool.pdf
Type: application/pdf
Size: 3042819 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171009/3bf9f8e8/attachment-0006.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Upper Panel - Mounting Tool_Assembly.pdf
Type: application/pdf
Size: 2384021 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171009/3bf9f8e8/attachment-0007.pdf>