[Dsg-rich] Schedule RICH stiffening tool load test

Tue Oct 10 03:57:28 EDT 2017

Ok,

9:00 is good also me.

Sandro

Il 09/10/2017 22:05, Mark Loewus ha scritto:
> Tyler,
>
> 9:00 is good for me on Wednesday. Set up the meeting. I will have to come to your office for the meeting. I don't have Skype, Bluejeans or a camera.
>
> Mark Loewus
> Manager of Crane Services
> Phone- 757-269-7847
> Cell- 757-871-3072
> Email- Loewus at jlab.org
>
> ----- Original Message -----
> From: "Tyler Lemon" <tlemon at jlab.org>
> To: "dario orecchini" <dario.orecchini at lnf.infn.it>, "Mark Loewus" <loewus at jlab.org>, "Tomassini Sandro" <sandro.tomassini at lnf.infn.it>, "dsg-rich" <dsg-rich at jlab.org>, "Bob Miller" <rmiller at jlab.org>
> Sent: Monday, October 9, 2017 9:21:58 AM
> Subject: Re: [Dsg-rich] Schedule RICH stiffening tool load test
>
> Hello Mark, Dario, and Sandro,
>
> I can set up a Bluejeans meeting for 9:00AM on October 10, 2017.
>
> Those of us at JLab could meet in the DSG control room (EEL 121c) at 9:00AM JLab time to start the meeting on Bluejeans with Sandro.
>
> We would then be able to move to EEL 125 to look at the stiffening tool and load test components if there are any more questions.
>
> Please let us know if 9:00AM is a good time for the meeting.
>
> Best regards,
> Tyler
>
>
> From: "dario orecchini" <dario.orecchini at lnf.infn.it>
> To: "Mark Loewus" <loewus at jlab.org>, "Tomassini Sandro" <sandro.tomassini at lnf.infn.it>, "Tyler Lemon" <tlemon at jlab.org>
> Cc: "dsg-rich" <dsg-rich at jlab.org>, "Bob Miller" <rmiller at jlab.org>
> Sent: Sunday, October 8, 2017 2:21:03 PM
> Subject: RE: [Dsg-rich] Schedule RICH stiffening tool load test
>
>
>
> Mark, Tyler & Sandro
>
> I propose to have a meeting (Bluejeans or Skype) on Tuesday, 9:00 am JLab time / 15:00 Italy time.
>
> In such a way we could have a discussion with Sandro too.
>
>
>
> Let me know, Dario
>
>
>
> Sent from Mail for Windows 10
>
>
>
>
> From: Mark Loewus
> Sent: Friday, October 6, 2017 9:49 PM
> To: Tomassini Sandro ; Tyler Lemon
> Cc: dsg-rich at jlab.org ; Bob Miller
> Subject: Re: [Dsg-rich] Schedule RICH stiffening tool load test
>
>
>
>
> Sandro, Tyler,
>
>
>
> I am glad to help with the load test. I am fairly new to the lab and this is going to be my first load test at the lab. I will need everyone's support to perform this load test successfully. I don't have any employees that directly work for me.
>
>
>
> I think we should schedule the load test after we make sure we have all the appropriate equipment, rigging and test weights. I will write the lift plan once I understand how the weights will be attached to the stiffening tool. We will need to gather the appropriate amount of test weights and borrow Doug Tilles dynamometer for the test.
>
>
>
> I need to understand where and how the test load should be attached to the fixture so the load is applied correctly without damaging the tool during the test. I also need to understand the orientation of the fixture during load test or tests.
>
>
>
> Since Bob Miller is extremely busy in hall "B", I don't think it is a good time to do a test in hall "B".
>
>
>
> We should meet to discuss how and where we are going to proceed with the load test. I will be busy on Monday dealing with a crane repair at the CHL. Tuesday would be a better day to meet and discuss.
>
>
>
> Respectfully,
>
>
>
> Mark Loewus
>
> Manager of Crane Services
>
> Phone- 757-269-7847
>
> Cell- 757-871-3072
>
> Email- Loewus at jlab.org
>
>
>
> ----- Original Message -----
>
> From: "Tomassini Sandro" <sandro.tomassini at lnf.infn.it>
>
> To: "Tyler Lemon" <tlemon at jlab.org>
>
> Cc: "Mark Loewus" <loewus at jlab.org>, dsg-rich at jlab.org, "Bob Miller" <rmiller at jlab.org>, "Doug Tilles" <tilles at jlab.org>
>
> Sent: Friday, October 6, 2017 1:42:41 PM
>
> Subject: Re: [Dsg-rich] Schedule RICH stiffening tool load test
>
>
>
> Hello I answer to Mark,
>
>
>
> About the load weight suspention a specific drawing does not exist since it was agreed with Miller to procede in this way:
>
> -Use a metal basket with lead bricks, you can find them in the hall b or ask to Bob or Doug
>
> - attach the basket to the test stand using two straps.
>
> - Dario Orecchini can help you.
>
> For any question do not hesitate to ask.
>
> Many thanks
>
> Sandro
>
>
>
>
>
> ⁣ Inviato da Blue
>
>
>
> Il giorno 6 ott 2017 19:19, alle ore 19:19, Tyler Lemon <tlemon at jlab.org> ha scritto:
>
>> Hello Mark,
>> Attached is a document from INFN collaborators containing details of
>> the stiffening tool part and load test we need to perform. These
>> details can be found on page 22.
>> As you would be the person performing the load test, would you also
>> write the lift plan? Also do you have any recommendations on a place
>> this load test could occur?
>> If you would need to meet to discuss the part and load test, I would be
>> available to meet you this afternoon or on Monday.
>> Please let us know.
>> Also, if you could "Reply All" to to this email when you reply to
>> ensure it goes to the dsg-rich at jlab.org mailing list, all collaborators
>> would be able to answer any questions you have.
>> Best regards,
>> Tyler
>> From: "Mark Loewus" <loewus at jlab.org>
>> To: "Tyler Lemon" <tlemon at jlab.org>
>> Sent: Thursday, October 5, 2017 2:41:10 PM
>> Subject: Re: Schedule RICH stiffening tool load test
>> Tyler,
>> You will have to coordinate an effort to find an adequate place to load
>> test. Do you have a drawing of how the test weights will be suspended
> >from the fixture. A lift plan needs to be developed and I need to 
>
>> review it before the load test is conducted. Give me a call if you
>> needed.
>> Mark Loewus
>> Manager of Crane Services
>> Phone- 757-269-7847
>> Cell- 757-871-3072
>> Email- Loewus at jlab.org
>> ----- Original Message -----
>> From: "Tyler Lemon" <tlemon at jlab.org>
>> To: "Mark Loewus" <loewus at jlab.org>
>> Cc: "dsg-rich" <dsg-rich at jlab.org>
>> Sent: Thursday, October 5, 2017 11:00:29 AM
>> Subject: Re: Schedule RICH stiffening tool load test
>> Hello Mark,
>> The plan to load test RICH's stiffening tool is to use the trolley
>> formerly for transportation of Hall B's drift chambers to attach a test
>> load to RICH's stiffening tool. In the attached PDF, page 1 shows a
>> diagram of the stiffening tool on the trolley with a test load.
>> I do not know where this load test can be performed or what item will
>> be used as the test weight as up until October 3, Hall B Engineering
>> was to perform the load test.
>> Will we need to take the trolley and stiffening tool to a specific
>> location for the load test?
>> Best regards,
>> Tyler
>> From: "Mark Loewus" <loewus at jlab.org>
>> To: "Tyler Lemon" <tlemon at jlab.org>
>> Sent: Wednesday, October 4, 2017 10:13:26 AM
>> Subject: Re: Schedule RICH stiffening tool load test
>> Tyler,
>> I need to understand how you will conduct the load test. Please, give
>> me a call so we can discuss. What is the SWL of the lifting device.
>> Mark Loewus
>> Manager of Crane Services
>> Phone- 757-269-7847
>> Cell- 757-871-3072
>> Email- Loewus at jlab.org
>> ----- Original Message -----
>> From: "Tyler Lemon" <tlemon at jlab.org>
>> To: "Mark Loewus" <loewus at jlab.org>, "dsg-rich" <dsg-rich at jlab.org>
>> Sent: Tuesday, October 3, 2017 9:32:13 AM
>> Subject: Schedule RICH stiffening tool load test
>> Hello Mark,
>> We need to schedule a load test for the RICH stiffening tool that will
>> be used to lift Hall B's RICH onto its transportation trolley.
>> Bob Miller has stated we should contact you for the load test.
>> Could we schedule the stiffening tool's load test for the morning of
>> October 11, 2017?
>> Please let us know.
>> Best regards,
>> Tyler
>> From: "Bob Miller" <rmiller at jlab.org>
>> To: "Tyler Lemon" <tlemon at jlab.org>
>> Cc: "Doug Tilles" <tilles at jlab.org>
>> Sent: Monday, October 2, 2017 1:11:42 PM
>> Subject: Re: Schedule RICH stiffening tool load test
>> Please see Doug Tilles's email from last month. The load test should be
>> done by Mark Loewus from Facilities.
>> Regards,
>> Bob
>> On 9/29/2017 9:54 AM, Tyler Lemon wrote:
>> Hello Bob,
>> We should receive the required parts to be able to load test the RICH
>> stiffening tool from G&R Metals by Friday October 6, 2017.
>> Could we schedule the stiffening tool's load test for October 10, 2017?
>> Please let us know when the load test can be scheduled.
>> Best regards,
>> Tyler
>> -- 
>> Bob Miller
>> Hall B Lead Engineer
>> Jefferson Lab
>> 757 269-7867
>> ------------------------------------------------------------------------
>> _______________________________________________
>> Dsg-rich mailing list
>> Dsg-rich at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/dsg-rich
>
>
> _______________________________________________
>
> Dsg-rich mailing list
>
> Dsg-rich at jlab.org
>
> https://mailman.jlab.org/mailman/listinfo/dsg-rich

-- 
-----------------------------------------
Dr. Eng. Sandro Tomassini
Istituto Nazionale di Fisica Nucleare
Laboratori Nazionali di Frascati
---Research Division---
P.O.Box 13 00044 Frascati (RM) Italy
Tel. office: +39 06 9403 2919/8089
Fax: +39 06 94032256
e-mail: sandro.tomassini at lnf.infn.it
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.lnf.infn.it_&d=DwIDaQ&c=lz9TcOasaINaaC3U7FbMev2lsutwpI4--09aP8Lu18s&r=9YtCiIg5kE6YCo5iFAyFiMgzNCONVcBowotEOgGZ4Co&m=1-egwzJvtwzTI2NvRjgEF_5OSNF1D0dcDrFpVsE6F6g&s=uJHV2OYP5KX-QDozYGXngUL0SzOZhk2A8g2fBEsSZx4&e= 
-----------------------------------------
-- 