[Dsg-rich] RICH Air Cooling meeting minutes

[Amrit Yegneswaran]

thanks marco. 


From: "Marco Contalbrigo" <mcontalb at fe.infn.it> 
To: "Amrit Yegneswaran" <yeg at jlab.org> 
Cc: "Marco Mirazita" <Marco.Mirazita at lnf.infn.it>, dsg-rich at jlab.org 
Sent: Monday, September 25, 2017 7:56:54 PM 
Subject: Re: [Dsg-rich] RICH Air Cooling meeting minutes 

Dear Amrit, 
although I was also tempted to assemble the aerogel in the 
better controlled small clean room I agree with what you say: 
let's wait and assemble it in the big clean room. I see not 
real conflict with SVT, as I am going to explain in the 
following mail. Bests, Marco. 

On Mon, 25 Sep 2017, Amrit Yegneswaran wrote: 

> hi marco, 
> 
> thanks for the info. 
> 
> please make an official request to volker, stepan and bob that RICH needs the place at 
> the back of the clean room to assemble the aerogel/mirrors etc. 
> so the svt/mvt has to be moved out to the FT area. 
> there is no reason why they cant be moved to the shower curtain room. 
> if for whatever reason they cannot, then i suggest RICH wait till they have gone and 
> assemble the stuff in the big clean room. 
> we may not be able to get RICH ready in time, but that is HallB's problem. 
> 
> moving the aerogel from the small cleanroom to the big clean room in my opinion is 
> foolhardy. 
> it is inconvenient and is potentially dangerous. 
> today, dario, vincenzo and tyler had a frame run. 
> getting out of the small clean room gowning room with the aerogel is something one 
> doesn't want to do. 
> 
> anyway,time was when cebaf scientists' answered to reason. 
> amrit 
> 
> time was when 
> 
> 
> please make an offical request 
> 
> 
> ______________________________________________________________________________________ 
> From: "Marco Mirazita" <Marco.Mirazita at lnf.infn.it> 
> To: "Amrit Yegneswaran" <yeg at jlab.org> 
> Cc: dsg-rich at jlab.org 
> Sent: Monday, September 25, 2017 4:21:27 PM 
> Subject: Re: [Dsg-rich] RICH Air Cooling meeting minutes 
> 
> Hi Amrit, 
> I didn't have the chance to speak with Bob this morning because he was 
> busy in the Hall, however we exchanged a couple of email, where I 
> explained why we want to have our system be approved by a DA as soon as 
> possible. 
> I also spoke with Patrizia about the situation. 
> Let's see what happens. 
> Marco 
> 
> 
> Il 2017-09-25 20:00 Amrit Yegneswaran ha scritto: 
> > hi amanda, 
> > 
> > thanks for the minutes of the meeting. 
> > 
> > marco mirazita had mentioned that, before he left for italy today, he 
> > would get in touch with bob miller regarding the urgently required DA 
> > for the 3-d printed manifold. 
> > 
> > hope he was able to do so. 
> > if he hasn't; bob, please appoint a DA as soon as you can, so that 
> > this issue -using a 3-d printed manifold, can be cleared up. 
> > 
> > amrit 
> > 
> > ------------------------- 
> > 
> > FROM: "Amanda Hoebel" <amandah at jlab.org> 
> > TO: dsg-rich at jlab.org 
> > SENT: Monday, September 25, 2017 11:39:56 AM 
> > SUBJECT: [Dsg-rich] RICH Air Cooling meeting minutes 
> > 
> > Hello, 
> > 
> > Attached are the minutes from Friday's meeting regarding RICH air 
> > cooling. 
> > 
> > Regards, 
> > Amanda 
> > 
> > _______________________________________________ 
> > Dsg-rich mailing list 
> > Dsg-rich at jlab.org 
> > https://mailman.jlab.org/mailman/listinfo/dsg-rich 
> > 
> > _______________________________________________ 
> > Dsg-rich mailing list 
> > Dsg-rich at jlab.org 
> > https://mailman.jlab.org/mailman/listinfo/dsg-rich 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170925/ae36ef49/attachment-0002.html>